im sorry i misread, do you have access to the bios? On Jul 1, 2016 1:02 PM, "Anthony LaTorre" <tlatorre@uchicago.edu> wrote:
On Fri, Jul 1, 2016 at 11:52 AM, Steve Volumetric <volumetricsteve@gmail.com> wrote:
Hello,
1.where'd you get this hardware?
It's hardware that is used in the lab I work in.
2.what's your install proceedure? what filesystem type are you putting
on
that CF card?
I haven't even gotten to that point. The installation fails before I get to a prompt to format the drive.
On Fri, Jul 1, 2016 at 12:49 PM, Anthony LaTorre <tlatorre@uchicago.edu> wrote:
Hi,
I'm trying to install CRUX 2.7.1 on a Pentium 3 single board computer with 512 MB of RAM. The data sheet for the SBC is here: https://www.surplussales.com/computeraccess/pdf/eqp-vmivme-7648-740.pdf
.
I'm booting from a CD ROM and after I get to the "boot: " prompt and hit enter everything goes OK until I get to:
* Copying files from squashfs
at which point everything goes haywire. Sometimes I get "cp: read error" messages, sometimes it segfaults, but I've never been able to get past this point.
I should mention that the only hard drive on the machine is an 8 GB compact flash card, I don't know if that's relevant.
Any ideas on whether I might be able to get this to work or not?
Thanks,
Tony _______________________________________________ CRUX mailing list CRUX@lists.crux.nu https://lists.crux.nu/mailman/listinfo/crux