Hello dhcpcd 3.1.9 (core) does not work. output: "eth0 timeout..." The same, with crux-2.4 iso, downgrade to 3.0.0 works fine? Tested on 2 different computers. pc 1 (via_rhine) pc 2 (e100) Any hints? Sorry, for my bad EN :-) Regards Ronny
Hello 3.0.18 :-)) Info, eth0: dhcpcd 3.0.18 starting Info, eth0: hardware address = 00:0b:6a:04:e3:c2 Info, eth0: broadcasting for a lease Debug, eth0: sending DHCP_DISCOVER with xid 0x1e9c2e44 Debug, eth0: waiting on select for 20 seconds Debug, eth0: got a packet with xid 0x1e9c2e44 Info, eth0: offered 192.168.178.30 from 192.168.178.1 Debug, eth0: sending DHCP_REQUEST with xid 0x1e9c2e44 Debug, eth0: waiting on select for 19 seconds Debug, eth0: got a packet with xid 0x1e9c2e44 Info, eth0: leased 192.168.178.30 for 864000 seconds Debug, eth0: renew in 432000 seconds Debug, eth0: rebind in 756000 seconds Info, eth0: adding IP address 192.168.178.30/24 Info, eth0: adding default route via 192.168.178.1 metric 0 Debug, eth0: writing /etc/resolv.conf Debug, eth0: writing /var/lib/dhcpcd/dhcpcd-eth0.info Debug, eth0: waiting on select for 432000 seconds Debug, eth0: waiting on select for 431993 seconds Info, eth0: received SIGINT, stopping Info, eth0: removing default route via 192.168.178.1 metric 0 Info, eth0: deleting IP address 192.168.178.30/24 Info, eth0: exiting 3.1.8 (from core) :-(( Info, eth0: dhcpcd 3.1.8 starting Info, eth0: hardware address = 00:0b:6a:04:e3:c2 Info, eth0: DUID = 00:01:00:01:0e:50:47:aa:00:50:8b:f6:99:6a Info, eth0: broadcasting for a lease Debug, eth0: sending DHCP_DISCOVER with xid 0x62cac223 Debug, eth0: waiting on select for 20 seconds Debug, eth0: sending DHCP_DISCOVER with xid 0x62cac223 Debug, eth0: sending DHCP_DISCOVER with xid 0x62cac223 Debug, eth0: sending DHCP_DISCOVER with xid 0x62cac223 Debug, eth0: sending DHCP_DISCOVER with xid 0x62cac223 Debug, eth0: sending DHCP_DISCOVER with xid 0x62cac223 Debug, eth0: sending DHCP_DISCOVER with xid 0x62cac223 Info, eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info' Info, eth0: probing for an IPV4LL address Debug, eth0: sending ARP probe #1 Debug, eth0: sending ARP probe #2 Debug, eth0: sending ARP probe #3 Debug, eth0: sending ARP claim #1 Debug, eth0: sending ARP claim #2 Info, eth0: adding IP address 169.254.87.46/16 Debug, eth0: no dns information to write Debug, eth0: writing /var/lib/dhcpcd/dhcpcd-eth0.info Debug, eth0: waiting on select for 10 seconds Debug, eth0: sending DHCP_DISCOVER with xid 0x26db8022 Debug, eth0: waiting on select for 20 seconds Debug, eth0: sending DHCP_DISCOVER with xid 0x26db8022 Debug, eth0: sending DHCP_DISCOVER with xid 0x26db8022 Debug, eth0: sending DHCP_DISCOVER with xid 0x26db8022 Debug, eth0: sending DHCP_DISCOVER with xid 0x26db8022 Info, eth0: received SIGINT, stopping Info, eth0: removing IP address 169.254.87.46/16 Info, eth0: exiting Any hints? Regards Ronny
Hello Ronny On Thu, Feb 07, 2008 at 11:12:07AM +0100 or thereabouts, Ronny Kornexl wrote:
Hello
3.0.18 :-))
Info, eth0: dhcpcd 3.0.18 starting Info, eth0: hardware address = 00:0b:6a:04:e3:c2 Info, eth0: broadcasting for a lease
3.1.8 (from core) :-((
Info, eth0: dhcpcd 3.1.8 starting Info, eth0: hardware address = 00:0b:6a:04:e3:c2 Info, eth0: DUID = 00:01:00:01:0e:50:47:aa:00:50:8b:f6:99:6a Info, eth0: broadcasting for a lease
Any hints?
Well I'm not an expert on this but I stumbled over this too :-) Between the 3.0 and the 3.1 series there was a change of the way the dhcp demon talks to your router. It passes not only the MAC but also a DUID string which your router (and mine) do not understand. Lookup man dhcpcd for the -I switch or putting echo "#undef ENABLE_DUID" >> config.h in the Pkgfile would be an option. Ciao Vincenzo -- ---| http://vico.kleinplanet.de |---
Am Donnerstag 07 Februar 2008 15:39:26 schrieb Vincenzo Colosimo: > Hello Ronny > > On Thu, Feb 07, 2008 at 11:12:07AM +0100 or thereabouts, Ronny Kornexl wrote: > > Hello > > > > 3.0.18 :-)) > > > > Info, eth0: dhcpcd 3.0.18 starting > > Info, eth0: hardware address = 00:0b:6a:04:e3:c2 > > Info, eth0: broadcasting for a lease > > > > 3.1.8 (from core) :-(( > > > > Info, eth0: dhcpcd 3.1.8 starting > > Info, eth0: hardware address = 00:0b:6a:04:e3:c2 > > Info, eth0: DUID = 00:01:00:01:0e:50:47:aa:00:50:8b:f6:99:6a > > Info, eth0: broadcasting for a lease > > > > Any hints? > > Well I'm not an expert on this but I stumbled over this too :-) > > Between the 3.0 and the 3.1 series there was a change of the way the > dhcp demon talks to your router. It passes not only the MAC but also a > DUID string which your router (and mine) do not understand. > > Lookup man dhcpcd for the -I switch or putting > echo "#undef ENABLE_DUID" >> config.h > in the Pkgfile would be an option. > > Ciao Vincenzo --------------- Hallo Many Thanks! The "-I" switch was the hint :-)) > /etc/rc.d/net < - /sbin/dhcpcd -t 10 -h $HOSTNAME eth0 + /sbin/dhcpcd -I "" -t 10 -h $HOSTNAME eth0 Regards Ronny
participants (3)
-
Matthias-Christian Ott -
Ronny Kornexl -
Vincenzo Colosimo