Hello, Can I find any info how hotplug/udev is working in crux? I'm a bit confused. I would like to start my a) Zaurus b) SD card For b) I checked with Ubuntu and it worked out of box. I try to copy some their conf., but i failed. Wawrzek -- Wawrzyniec Niewodniczański WWW: http://larryn.blogspot.com/ vel LarryN E-MAIL: wawrzyniec.niewodniczanski[na]pwr.wroc.pl PhD student @ JID: larryn@chrome.pl Wroclaw University of Technology TEL: +48(071)320-2894
I don't know about the Zaurus. The SD card will depend on a few things. I'll assume it's a USB adapter that you plug your SD card into. I've found the best way is to remove the adapter, then plug it in with the SD card in it. Then you can mount /dev/sda1 (could be anything like /dev/sd[a-z][1-9] depending on your configuration). Remember that if you want lots of automagic stuff then CRUX isn't for you. Crux just doesn't come with all that stuff but that's what it's about. I've set up my system to always have certain usb drives and memory cards mount to certain spots but I still have to mount them manually (I've got entries in /etc/fstab that enable users to mount them and also set the permissions and such). I believe there is a package in the repo somewhere that includes auto mounting but I haven't played with that yet. You'll need to spend some time with google and be prepared to read lots of howtos and man pages. Hope this helps, Joe wawrzyniec.niewodniczanski@pwr.wroc.pl wrote:
Hello,
Can I find any info how hotplug/udev is working in crux? I'm a bit confused. I would like to start my a) Zaurus b) SD card For b) I checked with Ubuntu and it worked out of box. I try to copy some their conf., but i failed.
Wawrzek
On Mon, 27 Feb 2006, Joe Gilmour wrote: I made two mistake: 1.) I should be more specify. 2.) maybe I don't really need hotplug.
I don't know about the Zaurus. When I put my Zaurus in cradle: a) Linux recognize it (from dmesg): usb 2-1: new full speed USB device using ohci_hcd and address 3 usb0: register 'zaurus' at usb-0000:00:02.3-1, Sharp Zaurus SL-5x00, c6:dc:77:7b:3b:5f
b) The usb0 interface become infallible, but have no ip address: usb0 Link encap:Ethernet HWaddr C6:DC:77:7B:3B:5F BROADCAST MULTICAST MTU:1494 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) What should I do to have usb0 starting after Zaurus is connected? I've already added /etc/hotplug/net.agent: case $ACTION in add|register) case $INTERFACE in [...] usb0) #MOJE if /usr/sbin/ethtool -i usb0 | grep -q Zaurus then ifconfig $INTERFACE 192.168.129.1/24 fi ;;
I've set up my system to always have certain usb drives and memory cards mount to certain spots but I still have to mount them manually (I've got entries in /etc/fstab that enable users to mount them and also set the permissions and such). I believe there is a package in the repo somewhere that includes auto mounting but I haven't played with that yet. It works. I have only one problem. I would like to be sure that CF card will be always sda1 (or whatever but always the sane). From time to time i will add creative mp3, and this should be ... i.e. sda2
Remember that if you want lots of automagic stuff then CRUX isn't for you. Crux just doesn't come with all that stuff but that's what it's about. I don't need Black Boxes, I need info how this BB works.
Thanks for your help Wawrzek -- Wawrzyniec Niewodniczański WWW: http://larryn.blogspot.com/ vel LarryN E-MAIL: wawrzyniec.niewodniczanski[na]pwr.wroc.pl PhD student @ JID: larryn@chrome.pl Wroclaw University of Technology TEL: +48(071)320-2894
participants (2)
-
Joe Gilmour -
wawrzyniec.niewodniczanski＠pwr.wroc.pl