Building X11R7.1

Darran Kartaschew darran.kartaschew at pcanu.com.au
Wed Sep 13 22:37:39 UTC 2006


>-----Original Message-----
>From: crux-bounces at lists.crux.nu [mailto:crux-bounces at lists.crux.nu] On
Behalf Of lucas at die.net.au
>Sent: Tuesday, 12 September 2006 13:12
>To: crux at lists.crux.nu
>Subject: Re: Building X11R7.1
>
On Tue, Sep 12, 2006 at 12:02:13PM +1000, Darran Kartaschew wrote:
> Hi Guys,
> 
> I'm currently reinstalling CRUX (due to a HDD failure), and decided to

> try out Danm's v2.2 AMD64 test build.
> 
> Being one for trying new stuff, I've successfully installed the latest

> kernel revision and have decided to try out X11R7.1 from X.org (If I 
> stuff it up, nothing's lost due to being a clean install).
> 
> Anyway, I'm only getting about 90% the way through the install, with 
> an error on xkbcomp causing a floating point exception when rebuilding

> the keyboard template files?
> 
> I've googled quite a bit and haven't come across anyone else with the 
> same error. That leads me to believe that it may be distro related, 
> rather than a bug in X (but if it's s bug, does anyone have a patch?).
> Or could it be related to GCC 4.0.3? (I know there are issues with 
> Mozilla and gcc4.0.3).
> 
> So if anyone has successfully built X11R7.1 on CRUX v2.2 (AMD64) using

> gcc 4.0.3, can you please let me know how and what you did?
> 
> If an upgrade to gcc 4.1.x is required, some pointers on the best way 
> to update it would be appreciated.
> 
> I'm trying to install straight from the bz2 tarballs (using that 
> script provided), and have read through the README several times... (I

> don't have an active internet connection at home, and the firewall at 
> work currently blocks git:// so can't get the absolutely bleeding edge

> source).
> 
> Cheers, Darran
> 
> PS. I do realise that Dan's build of CRUX v2.2 (AMD64) is considered a

> test version and the build/project is effectively dead...
> PPS. A copy of this email has been sent to the crux64 ml, but don't 
> know how many people still sunscribe to it...
>
>I'm been using danm's crux64 and x11r7 for a while now, I didn't
encounter any problems (short of having to modify a few ports that were
written with x11r6 in mind), and that is with gcc 4.0.3.
>
>Perhaps you could post the log for the build. More than 2 eyes are
better than 2...or something.
>


--
Hi Guys,

I've attached the last few lines of the compile output, and it's on the
execution of xkbcomp to generate compat.dir that xkbcomp generates a
floating point exception (not seen in the log). If you would like the
full log, let me know and I'll email it to you. (only 226kB bzip2).

The build was started using the following command:

# PATH=/usr/X11R7/bin:$PATH ./build-from-tarballs.sh -m
/opt/src_/X11R7/Mesa-6.5 /usr/X11R7

Darran

-------------------

Building data module component xkbdata-X11R7.0-1.0.1...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles...
no
checking for xkbcomp... /usr/X11R7/bin/xkbcomp
configure: creating ./config.status
config.status: creating Makefile
config.status: creating semantics/Makefile
config.status: creating keycodes/Makefile
config.status: creating keycodes/sgi/Makefile
config.status: creating keycodes/digital/Makefile
config.status: creating keymap/Makefile
config.status: creating keymap/sun/Makefile
config.status: creating keymap/digital/Makefile
config.status: creating keymap/sgi/Makefile
config.status: creating geometry/Makefile
config.status: creating geometry/digital/Makefile
config.status: creating geometry/sgi/Makefile
config.status: creating geometry/ibm/Makefile
config.status: creating compat/Makefile
config.status: creating rules/Makefile
config.status: creating symbols/Makefile
config.status: creating symbols/pc/Makefile
config.status: creating symbols/nec/Makefile
config.status: creating symbols/xfree68/Makefile
config.status: creating symbols/sony/Makefile
config.status: creating symbols/sgi/Makefile
config.status: creating symbols/macintosh/Makefile
config.status: creating symbols/sun/Makefile
config.status: creating symbols/fujitsu/Makefile
config.status: creating symbols/digital/Makefile
config.status: creating symbols/hp/Makefile
config.status: creating torture/Makefile
config.status: creating types/Makefile
config.status: creating config.h
make  all-recursive
make[1]: Entering directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1'
Making all in semantics
make[2]: Entering directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/semantics'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/semantics'
Making all in keycodes
make[2]: Entering directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keycodes'
Making all in digital
make[3]: Entering directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keycodes/digital'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keycodes/digital'
Making all in sgi
make[3]: Entering directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keycodes/sgi'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keycodes/sgi'
make[3]: Entering directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keycodes'
rm -f keycodes.dir
/usr/X11R7/bin/xkbcomp -lfhlpR -o keycodes.dir '*'
make[3]: Leaving directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keycodes'
make[2]: Leaving directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keycodes'
Making all in keymap
make[2]: Entering directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keymap'
Making all in sun
make[3]: Entering directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keymap/sun'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keymap/sun'
Making all in digital
make[3]: Entering directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keymap/digital'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keymap/digital'
Making all in sgi
make[3]: Entering directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keymap/sgi'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keymap/sgi'
make[3]: Entering directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keymap'
rm -f keymap.dir
/usr/X11R7/bin/xkbcomp -lfhlpR -o keymap.dir '*'
make[3]: Leaving directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keymap'
make[2]: Leaving directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/keymap'
Making all in compat
make[2]: Entering directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/compat'
rm -f compat.dir
/usr/X11R7/bin/xkbcomp -lfhlpR -o compat.dir '*'
make[2]: Leaving directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1/compat'
make[1]: Leaving directory
`/opt/src_/X11R7/X11R7/data/xkbdata-X11R7.0-1.0.1'



More information about the CRUX mailing list