March 2008 - CRUX - lists.crux.nu

Yelp 2.22.0
by Brian Madonna 02 Apr '08

02 Apr '08

Hello Everyone, I'm trying to upgrade to Gnome 2.22 it was recently put on the Gnome repo the past few days. I struggled with lots of packages failing and have fixed most of my issues however When I try to update Yelp it complains with the following error message. /usr/bin/ld: cannot find -lgtkembedmoz collect2: ld returned 1 exit status make[3]: *** [yelp] Error 1 make[3]: Leaving directory `/usr/ports/gnome/yelp/work/src/yelp-2.22.0/src' make[2]: *** [all] Error 2 make[2]: Leaving directory `/usr/ports/gnome/yelp/work/src/yelp-2.22.0/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/usr/ports/gnome/yelp/work/src/yelp-2.22.0' make: *** [all] Error 2 =======> ERROR: Building '/usr/ports/gnome/yelp/yelp#2.22.0-1.pkg.tar.gz' failed. -- Packages where update failed/usr/bin/ld: cannot find -lgtkembedmoz collect2: ld returned 1 exit status make[3]: *** [yelp] Error 1 make[3]: Leaving directory `/usr/ports/gnome/yelp/work/src/yelp-2.22.0/src' make[2]: *** [all] Error 2 make[2]: Leaving directory `/usr/ports/gnome/yelp/work/src/yelp-2.22.0/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/usr/ports/gnome/yelp/work/src/yelp-2.22.0' make: *** [all] Error 2 =======> ERROR: Buildinglgtkembedmoz '/usr/ports/gnome/yelp/yelp#2.22.0-1.pkg.tar.gz' faillgtkembedmozed. -- Packages where update failed yelp yelp I'm pretty sure lgtkembedmoz is part of mozilla-runtime but there isn't any mozilla-dev or mozilla packages on any of the repos I have and I already have firefox. I've also tried compiling xulrunner with no suscess compiling xulrunner. Any assistance with finding a fix for this would be greatly helpful. Thanks, Brian Madonna

5 9

Fix for can't read /usr/lib/gcc/i686-pc-linux-gnu/4.1.2/libstdc++.la
by Danny Rawlins 31 Mar '08

31 Mar '08

Note on crux update 2.3 -> 2.4 and recent gcc 4.2.2 -> 4.2.3 "can't read /usr/lib/gcc/i686-pc-linux-gnu/4.1.2/libstdc++.la: No such file or directory" Is caused by libtool. Any library you have compiled and contains .la files, has references to non-existing .la files. On runtime, you will not notice anything at all of this operation. At compile time however, expect build errors about missing .la files. The bug isn't in the package that misses the .la file then, but in the package that references this .la file. The fix is to grep all *.la files and then use prt-cache fsearch foo.la to find what package it came from then to do a force rebuild prt-cache update -fr --install-scripts foo. -- Danny Rawlins <Romster>

1 0

Yelp 2.22.0
by Brian Madonna 31 Mar '08

31 Mar '08

Hello Everyone, I'm trying to upgrade to Gnome 2.22 it was recently put on the Gnome repo the past few days. I struggled with lots of packages failing and have fixed most of my issues however When I try to update Yelp it complains with the following error message. /usr/bin/ld: cannot find -lgtkembedmoz collect2: ld returned 1 exit status make[3]: *** [yelp] Error 1 make[3]: Leaving directory `/usr/ports/gnome/yelp/work/src/yelp-2.22.0/src' make[2]: *** [all] Error 2 make[2]: Leaving directory `/usr/ports/gnome/yelp/work/src/yelp-2.22.0/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/usr/ports/gnome/yelp/work/src/yelp-2.22.0' make: *** [all] Error 2 =======> ERROR: Building '/usr/ports/gnome/yelp/yelp#2.22.0-1.pkg.tar.gz' failed. -- Packages where update failed/usr/bin/ld: cannot find -lgtkembedmoz collect2: ld returned 1 exit status make[3]: *** [yelp] Error 1 make[3]: Leaving directory `/usr/ports/gnome/yelp/work/src/yelp-2.22.0/src' make[2]: *** [all] Error 2 make[2]: Leaving directory `/usr/ports/gnome/yelp/work/src/yelp-2.22.0/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/usr/ports/gnome/yelp/work/src/yelp-2.22.0' make: *** [all] Error 2 =======> ERROR: Buildinglgtkembedmoz '/usr/ports/gnome/yelp/yelp#2.22.0-1.pkg.tar.gz' faillgtkembedmozed. -- Packages where update failed yelp yelp I'm pretty sure lgtkembedmoz is part of mozilla-runtime but there isn't any mozilla-dev or mozilla packages on any of the repos I have and I already have firefox. I've also tried compiling xulrunner with no suscess compiling xulrunner. Any assistance with finding a fix for this would be greatly helpful. Thanks, Brian Madonna

1 0

Is the port gnome-light in future plans?
by Кожухов Евгений 30 Mar '08

30 Mar '08

Is the port 'gnome-light' (2.22) in future plans? With respect, ulins.

1 0

Re: kernel panic - unable to mount root fs
by Gellért Balázs 27 Mar '08

27 Mar '08

2008/3/26, Richard Pöttler <richard.poettler(a)gmail.com>: > On Wed, Mar 26, 2008 at 03:09:18PM +0100, Gellért Balázs wrote: > > > I think, you have installed grub into your mbr > > > > Yes, I have. But not during CRUX install. Much more earlier, when I > > had installed another linux distro on the box. > > Then you should edit the original grub configuration file. Afaik grub will > always use the configuration file you used while installing it into the mbr. I edited the original grub file while installing crux, but after that I was not able to boot crux for some reason. That's why I'll try some other tricks like chainloading or re-write the mbr. > > I checked that grub package is not available from the install iso, > > because my experience is that the 'core' repo is only available from > > the iso (neither 'opt' and or 'xorg'). While the 'core' repo only > > includes lilo. > > There are some xorg and opt ports on the iso (firefox and all it's dependencies > for sure), but not installed. The packages are there to be used with pkgadd. But > i don't know, whether grub is among them. OK, I'll try pkgadd. > > I suppose I should try some chainloading from the existing grub > > sitting in the mbr toward my CRUX lilo which I should install to the > > root partition of my CRUX. > > Could be a solution, but it shouldn't be more difficult to alter your existing > grub configuration to choose the right root and kernel image. I've already altered grub config (see above). Thanks Balazs

1 0

Re: CRUX Digest, Vol 42, Issue 16
by Gellért Balázs 26 Mar '08

26 Mar '08

> > Make sure SCSI target support, SCSI device support, SCSI disc support, > > SCSI CD-Rom support and SCSI Generic support are built-in, as these > > are required to create the device node and provide the SATA-SCSI > > interface. > > > > Since Jaeger gave me a talking to over the inaccuracy of the above > statement, I'll point out that SCSI CD-Rom support, SCSI target support > and SCSI Generic support are not "required" if all you want is the > hard-disc. > > But SCSI CD-Rom support is required in order to utilise a CD-Rom drive, > SCSI generic support is useful for card-readers and screwy CD burners > and SCSI target support I forget at the moment. I enabled all these parameters as built-in. I think the problem is connected with the boot loading process. Maybe I should install and configure crux lilo or grub into the mbr or to the root at least. In the later case I should use chainloading in my original 'third party' grub menu.lst. Am I right? Balazs

1 0

Re: CRUX Digest, Vol 42, Issue 15
by Gellért Balázs 26 Mar '08

26 Mar '08

> Also make sure the sata driver and file system type are compiled into > the kernel (not modules). > > Joe I checked these parameters in the kernel but they seemed to be correct: [*]. Balazs

1 0

kernel panic - unable to mount root fs
by Gellért Balázs 25 Mar '08

25 Mar '08

Hi All, I am a Newbe. I tried to install CRUX 2.4 on my laptop. During installing and configuration, everything seemed to good. I was able to install the core system to my SATA harddisk, furthermore my other partitions were available as well. Though when I completed install procedure, I tried to boot CRUX from the harddisk, the boot process stopped with following messages: "VFS: Cannot open root device "sda6" or unknown block (0,0)" "Please append a correct "root=" boot option, here is the available partitioins: 1600 4194302 hdc driver: ide cdrom" "Kernel panic - not syncing: UFS: Unable to mount root fs on unknown block (0,0)" I am sure my fstab and boot loader config file is correct. Could it be the problem that I did not use own lilo for CRUX in order to boot? I edited an existed grub menu.lst of another linux distro that runs on my laptop. Any help is appreciated, gellba

4 4

GRUB changes.
by Brett Goulder 22 Mar '08

22 Mar '08

Due to my recent battery of changes to the GRUB port in opt, the config file name has been changed to match upstream GRUB, it is now menu.lst instead of grub.conf (a Red Hat convention and really, pointless cosmetic change). This will only affect users who would be reinstalling GRUB to their MBR or partition, people merely updating to the new GRUB version won't be affected until they rerun setup (hd0) or equivalent in GRUB. However, a simple mv /boot/grub/grub.conf /boot/grub/menu.lst will solve this problem. -- ~predatorfreak GnuPG Public key: http://pred.dcaf-security.org/dcafsec-pub-gpgkey.asc

1 0

ports/opt (2.4): [notify] postgresql: updated to 8.2.7
by crux＠crux.nu 19 Mar '08

19 Mar '08

commit 2326053d766f176ef58e187fcc0a7e97f4ceab92 Author: Simone Rota <sip(a)crux.nu> Date: Wed Mar 19 17:10:41 2008 +0000 [notify] postgresql: updated to 8.2.7 The version previously in our repo (8.2.5) had some security issue, see the advisories resolved for 8.2.6 at: http://www.postgresql.org/support/security diff --git a/postgresql/.footprint b/postgresql/.footprint index 5deca73..6f8dd0a 100644 --- a/postgresql/.footprint +++ b/postgresql/.footprint @@ -792,6 +792,7 @@ drwxr-xr-x root/root usr/share/postgresql/timezone/America/Kentucky/ -rw-r--r-- root/root usr/share/postgresql/timezone/America/Maceio -rw-r--r-- root/root usr/share/postgresql/timezone/America/Managua -rw-r--r-- root/root usr/share/postgresql/timezone/America/Manaus +-rw-r--r-- root/root usr/share/postgresql/timezone/America/Marigot -rw-r--r-- root/root usr/share/postgresql/timezone/America/Martinique -rw-r--r-- root/root usr/share/postgresql/timezone/America/Mazatlan -rw-r--r-- root/root usr/share/postgresql/timezone/America/Mendoza @@ -833,6 +834,7 @@ drwxr-xr-x root/root usr/share/postgresql/timezone/America/North_Dakota/ -rw-r--r-- root/root usr/share/postgresql/timezone/America/Sao_Paulo -rw-r--r-- root/root usr/share/postgresql/timezone/America/Scoresbysund -rw-r--r-- root/root usr/share/postgresql/timezone/America/Shiprock +-rw-r--r-- root/root usr/share/postgresql/timezone/America/St_Barthelemy -rw-r--r-- root/root usr/share/postgresql/timezone/America/St_Johns -rw-r--r-- root/root usr/share/postgresql/timezone/America/St_Kitts -rw-r--r-- root/root usr/share/postgresql/timezone/America/St_Lucia diff --git a/postgresql/.md5sum b/postgresql/.md5sum index 0d2b6c3..a4bf172 100644 --- a/postgresql/.md5sum +++ b/postgresql/.md5sum @@ -1,2 +1,2 @@ f5eeff17dd7117175794459f7097ad1a postgresql -bb1cd309ea72f070cb964736f5755847 postgresql-8.2.5.tar.bz2 +e8b21cbc20ec23a1d9490fdfbaa7c09e postgresql-8.2.7.tar.bz2 diff --git a/postgresql/Pkgfile b/postgresql/Pkgfile index 5d669eb..a525ff8 100644 --- a/postgresql/Pkgfile +++ b/postgresql/Pkgfile @@ -5,7 +5,7 @@ # Depends on: name=postgresql -version=8.2.5 +version=8.2.7 release=1 source=(ftp://ftp9.de.postgresql.org/unix/databases/postgresql/source/v$ver… postgresql)

1 0