November 2018 - CRUX - lists.crux.nu

Re: Crux boot-up time error
by Fredrik Rinnestam 12 Nov '18

12 Nov '18

On Sun, Nov 11, 2018 at 05:20:31PM -0700, bobby wrote: > I did that, and it returned: > "No such image. [Tab] shows a list.". > When I do [tab], it returns CRUX, which puts me at where I started. Try something like image=/boot/vmlinuz append="root=/dev/xvda1" > On Sun, Nov 11, 2018 at 5:14 PM Fredrik Rinnestam <fredrik(a)rinnestam.se> > wrote: > > > On Sun, Nov 11, 2018 at 05:06:54PM -0700, bobby wrote: > > > It seems I am using LILO, because when I hold down shift to get into > > single > > > user mode it gives me this prompt: > > > LILO boot: > > > How do I enter single user mode via this? > > > > According to https://www.tldp.org/HOWTO/html_single/LILO/#ss2.3 > > > > you can probably just enter root=/dev/xvda1 (I'm just guessing here > > according to what your initial screenshot suggested) > > > > /f > > > > > On Sun, Nov 11, 2018 at 5:05 PM Fredrik Rinnestam <fredrik(a)rinnestam.se> > > > wrote: > > > > > > > On Sun, Nov 11, 2018 at 04:54:51PM -0700, bobby wrote: > > > > > Where is the bootloader conf file located at? > > > > > > > > Depends on what bootloader you use. If its lilo you should have a > > > > /etc/lilo.conf file. You then run 'lilo' to write the changes to the > > > > bootsector. > > > > > > > > grub uses /boot/grub/grub.cfg and looks at the config each time you > > > > boot. So no need to do anything else. > > > > > > > > /f > > > > > > > > > > > > > > > > > > VFS: unable to mount root fs is due to the kernel not having the > > > > device > > > > > > > driver for the root filesystem built in to it or not having the > > > > device > > > > > > > driver for the disk bus built in. > > > > > > > > > > > > > > I imagine that xcp-ng, whatever that is, presents different > > devices > > > > to > > > > > > the > > > > > > > virtual guest than virtualbox did. > > > > > > > > > > > > > > -Daryl > > > > > > > > > > > > From what I can tell it just looks like the root= needs to be > > adjusted > > > > > > in the bootloader. root=xvda1 perhaps? > > > > > > > > > > > > Not at all familiar with xenserver so forgive my ignorance. > > > > > > -- Fredrik Rinnestam

3 2

Re: Crux boot-up time error
by Fredrik Rinnestam 12 Nov '18

12 Nov '18

On Sun, Nov 11, 2018 at 05:06:54PM -0700, bobby wrote: > It seems I am using LILO, because when I hold down shift to get into single > user mode it gives me this prompt: > LILO boot: > How do I enter single user mode via this? According to https://www.tldp.org/HOWTO/html_single/LILO/#ss2.3 you can probably just enter root=/dev/xvda1 (I'm just guessing here according to what your initial screenshot suggested) /f > On Sun, Nov 11, 2018 at 5:05 PM Fredrik Rinnestam <fredrik(a)rinnestam.se> > wrote: > > > On Sun, Nov 11, 2018 at 04:54:51PM -0700, bobby wrote: > > > Where is the bootloader conf file located at? > > > > Depends on what bootloader you use. If its lilo you should have a > > /etc/lilo.conf file. You then run 'lilo' to write the changes to the > > bootsector. > > > > grub uses /boot/grub/grub.cfg and looks at the config each time you > > boot. So no need to do anything else. > > > > /f > > > > > > > > > > > > VFS: unable to mount root fs is due to the kernel not having the > > device > > > > > driver for the root filesystem built in to it or not having the > > device > > > > > driver for the disk bus built in. > > > > > > > > > > I imagine that xcp-ng, whatever that is, presents different devices > > to > > > > the > > > > > virtual guest than virtualbox did. > > > > > > > > > > -Daryl > > > > > > > > From what I can tell it just looks like the root= needs to be adjusted > > > > in the bootloader. root=xvda1 perhaps? > > > > > > > > Not at all familiar with xenserver so forgive my ignorance. > > > >

1 0

Crux boot-up time error
by bobby 12 Nov '18

12 Nov '18

I am getting this error message after transferring my vm from virtualbox => xcp-ng.

3 4

journalctl
by Erich Eckner 11 Nov '18

11 Nov '18

Hi, I'm in the situation, that I need to look at systemd-journald logs on a crux machine. And I was wondering if anyone has done that before and is maybe willing to share a slim Pkgfile to compile/package only (or mostly) journalctl. The systemd guys suggest to compile whole systemd to get the log reader, but I would really not like to do that. regards, Erich

2 1

ports/opt (3.4): [notify] libtiff: updated to 4.0.10. Many security fixes.
by crux＠crux.nu 10 Nov '18

10 Nov '18

commit 81cfb9814fb48494268f9d233d9f1cc26164f98c Author: Fredrik Rinnestam <fredrik(a)crux.nu> Date: Sat Nov 10 18:02:43 2018 +0100 [notify] libtiff: updated to 4.0.10. Many security fixes. See http://www.simplesystems.org/libtiff/v4.0.10.html for details. diff --git a/libtiff/.footprint b/libtiff/.footprint index 8eece2441..df6bb0645 100644 --- a/libtiff/.footprint +++ b/libtiff/.footprint @@ -8,14 +8,14 @@ drwxr-xr-x root/root usr/include/ drwxr-xr-x root/root usr/lib/ -rw-r--r-- root/root usr/lib/libtiff.a -rwxr-xr-x root/root usr/lib/libtiff.la -lrwxrwxrwx root/root usr/lib/libtiff.so -> libtiff.so.5.3.0 -lrwxrwxrwx root/root usr/lib/libtiff.so.5 -> libtiff.so.5.3.0 --rwxr-xr-x root/root usr/lib/libtiff.so.5.3.0 +lrwxrwxrwx root/root usr/lib/libtiff.so -> libtiff.so.5.4.0 +lrwxrwxrwx root/root usr/lib/libtiff.so.5 -> libtiff.so.5.4.0 +-rwxr-xr-x root/root usr/lib/libtiff.so.5.4.0 -rw-r--r-- root/root usr/lib/libtiffxx.a -rwxr-xr-x root/root usr/lib/libtiffxx.la -lrwxrwxrwx root/root usr/lib/libtiffxx.so -> libtiffxx.so.5.3.0 -lrwxrwxrwx root/root usr/lib/libtiffxx.so.5 -> libtiffxx.so.5.3.0 --rwxr-xr-x root/root usr/lib/libtiffxx.so.5.3.0 +lrwxrwxrwx root/root usr/lib/libtiffxx.so -> libtiffxx.so.5.4.0 +lrwxrwxrwx root/root usr/lib/libtiffxx.so.5 -> libtiffxx.so.5.4.0 +-rwxr-xr-x root/root usr/lib/libtiffxx.so.5.4.0 drwxr-xr-x root/root usr/lib/pkgconfig/ -rw-r--r-- root/root usr/lib/pkgconfig/libtiff-4.pc drwxr-xr-x root/root usr/share/ diff --git a/libtiff/.signature b/libtiff/.signature index a8cb21942..050af68c9 100644 --- a/libtiff/.signature +++ b/libtiff/.signature @@ -1,5 +1,5 @@ untrusted comment: verify with /etc/ports/opt.pub -RWSE3ohX2g5d/S4XR+7lp1kCF5mYKqZSP9BmVGKm4/AYE2H1u/oVvLEwlKXCOkTGvwqxYQZoXglmr90hdlAYIM+60qXLSXS6hgU= -SHA256 (Pkgfile) = b3ee9a7d13c0cdc2642825e248fbc40683826c6e3aaa88f010437c8f77ac473b -SHA256 (.footprint) = a3d4c93006cf2c9f92547f7b6a82687552d3c71cadd79e37e14542d8cbe3ed06 -SHA256 (tiff-4.0.9.tar.gz) = 6e7bdeec2c310734e734d19aae3a71ebe37a4d842e0e23dbb1b8921c0026cfcd +RWSE3ohX2g5d/QM2dliZj+QR1yu/C8xuNkdUkdvJhHIlmICzyuDWs7+5hhL960t5DqCLc17HCOvw3gAk2zA6dDcVBXcq41GXKQc= +SHA256 (Pkgfile) = 9ae5e85f8b809009a2556e6e28efaca019a4a6fccb27ce925ddb3b2c05462dc6 +SHA256 (.footprint) = 62c1fe6cdcdcfd5e5eb34b8b795ddffebc5f43f2d2460df7f3723d970d31836f +SHA256 (tiff-4.0.10.tar.gz) = 2c52d11ccaf767457db0c46795d9c7d1a8d8f76f68b0b800a3dfe45786b996e4 diff --git a/libtiff/Pkgfile b/libtiff/Pkgfile index f7c131a2e..b75a7e647 100644 --- a/libtiff/Pkgfile +++ b/libtiff/Pkgfile @@ -4,15 +4,15 @@ # Depends on: libjpeg-turbo, zlib name=libtiff -version=4.0.9 +version=4.0.10 release=1 source=(http://download.osgeo.org/libtiff/tiff-$version.tar.gz) build() { - cd tiff-$version + cd tiff-$version - ./configure --prefix=/usr - make - make DESTDIR=$PKG install - rm -r $PKG/usr/{bin,share/{doc,man/man1}} + ./configure --prefix=/usr + make + make DESTDIR=$PKG install + rm -r $PKG/usr/{bin,share/{doc,man/man1}} }

1 0

ports/contrib (3.4): [notify] deluge: depency change: pyopenssl and pyxdg renamed to python-pyopenssl and python-pyxdg
by crux＠crux.nu 10 Nov '18

10 Nov '18

commit a1beda3bf5095014db83866440066524faf7a090 Author: Danny Rawlins <monster.romster(a)gmail.com> Date: Sat Nov 10 23:03:17 2018 +1100 [notify] deluge: depency change: pyopenssl and pyxdg renamed to python-pyopenssl and python-pyxdg diff --git a/deluge/.signature b/deluge/.signature index d70a3b65..70bd5181 100644 --- a/deluge/.signature +++ b/deluge/.signature @@ -1,6 +1,6 @@ untrusted comment: verify with /etc/ports/contrib.pub -RWSagIOpLGJF3y96ZPeojFF1TTQwmII4HtwnrUeCkcYxLk8J97KiMnDrdV4VDIqYId2YzvHLChdRvcM06oDQk4NLTU46+QPedQw= -SHA256 (Pkgfile) = e30b9c650073c6e1ed2d50ce1da95f56be4a3e1dfb02109486e1fc136c756139 +RWSagIOpLGJF37zicNLAVVDa/mfOArvY8/ho8lpF2IVlcujcl5z4eSy9chuD6rwo1jPN395kiB7+27F9Qybyy3ukafSBfgU6PgY= +SHA256 (Pkgfile) = 8f4c02bf436111356841333df62e0a6817c2d06737c54ed2db8ddff397405b56 SHA256 (.footprint) = 1d896616ba8b0b7d29af50b12f423c71d0baaae009cf1280eb65fab87892d792 SHA256 (deluge-1.3.15.tar.xz) = a96405140e3cbc569e6e056165e289a5e9ec66e036c327f3912c73d049ccf92c SHA256 (3064.patch) = 0157e094eb12ebd448c4c89e538082df4ca13c1f959f9c4ac81236f34600c3ef diff --git a/deluge/Pkgfile b/deluge/Pkgfile index 849e8e63..01910f3c 100644 --- a/deluge/Pkgfile +++ b/deluge/Pkgfile @@ -1,8 +1,7 @@ # Description: A bittorrent client based on Python and GTK. # URL: http://deluge-torrent.org/ # Maintainer: Danny Rawlins, crux at romster dot me -# Packager: Brett Goulder, predatorfreak at dcaf-security dot org. -# Depends on: python-chardet librsvg libtorrent-rasterbar mako python3-pyxdg pyopenssl pyxdg python-twisted +# Depends on: librsvg libtorrent-rasterbar python-chardet python-pyopenssl python-pyxdg python-twisted python3-pyxdg name=deluge version=1.3.15

1 0

ports/contrib (3.4): [notify] python-cryptography: 2.2.2 -> 2.3.1 dependency change: enum34 -> python-enum34
by crux＠crux.nu 10 Nov '18

10 Nov '18

commit eb721014877ba959faa9a9e8d4cd045e5c88f045 Author: Danny Rawlins <monster.romster(a)gmail.com> Date: Sat Nov 10 22:11:34 2018 +1100 [notify] python-cryptography: 2.2.2 -> 2.3.1 dependency change: enum34 -> python-enum34 diff --git a/python-cryptography/.footprint b/python-cryptography/.footprint index 32344609..bea3d431 100644 --- a/python-cryptography/.footprint +++ b/python-cryptography/.footprint @@ -2,13 +2,13 @@ drwxr-xr-x root/root usr/ drwxr-xr-x root/root usr/lib/ drwxr-xr-x root/root usr/lib/python2.7/ drwxr-xr-x root/root usr/lib/python2.7/site-packages/ -drwxr-xr-x root/root usr/lib/python2.7/site-packages/cryptography-2.2.2-py2.7.egg-info/ --rw-r--r-- root/root usr/lib/python2.7/site-packages/cryptography-2.2.2-py2.7.egg-info/PKG-INFO --rw-r--r-- root/root usr/lib/python2.7/site-packages/cryptography-2.2.2-py2.7.egg-info/SOURCES.txt --rw-r--r-- root/root usr/lib/python2.7/site-packages/cryptography-2.2.2-py2.7.egg-info/dependency_links.txt --rw-r--r-- root/root usr/lib/python2.7/site-packages/cryptography-2.2.2-py2.7.egg-info/not-zip-safe --rw-r--r-- root/root usr/lib/python2.7/site-packages/cryptography-2.2.2-py2.7.egg-info/requires.txt --rw-r--r-- root/root usr/lib/python2.7/site-packages/cryptography-2.2.2-py2.7.egg-info/top_level.txt +drwxr-xr-x root/root usr/lib/python2.7/site-packages/cryptography-2.3.1-py2.7.egg-info/ +-rw-r--r-- root/root usr/lib/python2.7/site-packages/cryptography-2.3.1-py2.7.egg-info/PKG-INFO +-rw-r--r-- root/root usr/lib/python2.7/site-packages/cryptography-2.3.1-py2.7.egg-info/SOURCES.txt +-rw-r--r-- root/root usr/lib/python2.7/site-packages/cryptography-2.3.1-py2.7.egg-info/dependency_links.txt +-rw-r--r-- root/root usr/lib/python2.7/site-packages/cryptography-2.3.1-py2.7.egg-info/not-zip-safe +-rw-r--r-- root/root usr/lib/python2.7/site-packages/cryptography-2.3.1-py2.7.egg-info/requires.txt +-rw-r--r-- root/root usr/lib/python2.7/site-packages/cryptography-2.3.1-py2.7.egg-info/top_level.txt drwxr-xr-x root/root usr/lib/python2.7/site-packages/cryptography/ -rw-r--r-- root/root usr/lib/python2.7/site-packages/cryptography/__about__.py -rw-r--r-- root/root usr/lib/python2.7/site-packages/cryptography/__about__.pyc diff --git a/python-cryptography/.signature b/python-cryptography/.signature index 61af2653..39c54356 100644 --- a/python-cryptography/.signature +++ b/python-cryptography/.signature @@ -1,5 +1,5 @@ untrusted comment: verify with /etc/ports/contrib.pub -RWSagIOpLGJF33A3XA0kCpK+To+7ozvTn5QiU3JKqq6amviDh2dCCbE2Lj7anq3+KOR77xkCML6Ez940mN16ISnhFTAwJOqdhQk= -SHA256 (Pkgfile) = f244b11ce946e61902dd6b5401032494e44551aaef2166196102b0479b98ff22 -SHA256 (.footprint) = 0bca57bf549ec9c4b81975d5716825f5f40fe66b83397929eedad09d129127a6 -SHA256 (cryptography-2.2.2.tar.gz) = 9fc295bf69130a342e7a19a39d7bbeb15c0bcaabc7382ec33ef3b2b7d18d2f63 +RWSagIOpLGJF3y3ZNMmQU71X9vxSfXzXPR5hXqJi6sm+ddjuoCzUMOwaatfZLaUoeYKOm6MQvO+KonOCxiRt6LVtTl9fVsmoIgc= +SHA256 (Pkgfile) = 86be465feee25d8818c6bed559b1e212dee36d036b9c1a0748ef7208991e2cb6 +SHA256 (.footprint) = c89693430fb9c5dd6f3927e8b30cb46d1b1f35e6484659b34d1ed933c8c3fdca +SHA256 (cryptography-2.3.1.tar.gz) = 8d10113ca826a4c29d5b85b2c4e045ffa8bad74fb525ee0eceb1d38d4c70dfd6 diff --git a/python-cryptography/Pkgfile b/python-cryptography/Pkgfile index fc461bf5..666fca28 100644 --- a/python-cryptography/Pkgfile +++ b/python-cryptography/Pkgfile @@ -1,10 +1,10 @@ # Description: A package designed to expose cryptographic recipes and primitives to Python developers. # URL: http://pypi.python.org/pypi/cryptography # Maintainer: Danny Rawlins, crux at romster dot me -# Depends on: enum34 python-pyasn1 python-cffi +# Depends on: python-enum34 python-pyasn1 python-cffi name=python-cryptography -version=2.2.2 +version=2.3.1 release=1 source=(https://files.pythonhosted.org/packages/source/${name:7:1}/${name#*…

1 0

ports/contrib (3.4): [notify] enum34 renamed to python-enum34
by crux＠crux.nu 10 Nov '18

10 Nov '18

commit 72953492196d3b0de915e3bcbc6c0a70234bb860 Author: Danny Rawlins <monster.romster(a)gmail.com> Date: Sat Nov 10 22:08:39 2018 +1100 [notify] enum34 renamed to python-enum34 diff --git a/enum34/.footprint b/python-enum34/.footprint similarity index 100% rename from enum34/.footprint rename to python-enum34/.footprint diff --git a/enum34/.signature b/python-enum34/.signature similarity index 56% rename from enum34/.signature rename to python-enum34/.signature index 2912a955..4d5a3a7e 100644 --- a/enum34/.signature +++ b/python-enum34/.signature @@ -1,5 +1,5 @@ untrusted comment: verify with /etc/ports/contrib.pub -RWSagIOpLGJF34MsebmlLuhhadNvzhBUo3mcnFiRIIXkVq8iUXHp3TEQ1U2GqlhDZF5PFJOH0oEbERxdJrzeiNz5KGHBmuQTzgg= -SHA256 (Pkgfile) = 19697de89fce01a452a1eddb63b3b8c8a4c8d0bc8a334ef3c282bf2dddd0057d +RWSagIOpLGJF37Kcqd+Yc8Cj7rBmjgrdwPiMRBMPkgqnHAkHkQpJ/hIB2ZIZUlEmOEcV0G9MUixuwHlG8tBS1+1FgkD93qLitQ8= +SHA256 (Pkgfile) = eb65893ec5746a4f369fa098ca8ebc4504b2c5efcf7de5fb72ba4e39b6a07312 SHA256 (.footprint) = c9cb8ac62a24f103c18c169fd9b4cac4b17d01243bf3e1299020634fa1ea55c1 SHA256 (enum34-1.1.6.tar.gz) = 8ad8c4783bf61ded74527bffb48ed9b54166685e4230386a9ed9b1279e2df5b1 diff --git a/enum34/Pkgfile b/python-enum34/Pkgfile similarity index 63% rename from enum34/Pkgfile rename to python-enum34/Pkgfile index 59206a47..6026ae52 100644 --- a/enum34/Pkgfile +++ b/python-enum34/Pkgfile @@ -1,16 +1,15 @@ # Description: Python 3.4 Enum backported # URL: https://pypi.python.org/pypi/enum34 # Maintainer: Danny Rawlins, crux at romster dot me -# Packager: Danny Rawlins, crux at romster dot me # Depends on: python-setuptools -name=enum34 +name=python-enum34 version=1.1.6 release=1 -source=(https://pypi.python.org/packages/bf/3e/31d502c25302814a7c2f1d3959d2a3b3f78e509002ba91aea64993936876/$name-$version.tar.gz) +source=(https://files.pythonhosted.org/packages/source/${name:7:1}/${name#*-}/${name#*-}-$version.tar.gz) build() { - cd $name-$version + cd ${name#*-}-$version /usr/bin/python setup.py build /usr/bin/python setup.py install --root=$PKG --optimize=1

1 0

ports/contrib (3.4): [notify] pyopenssl renamed to python-pyopenssl
by crux＠crux.nu 10 Nov '18

10 Nov '18

commit e0b49f839cb62f7eb168eadf5a4c779239f9ddc8 Author: Danny Rawlins <monster.romster(a)gmail.com> Date: Sat Nov 10 21:58:56 2018 +1100 [notify] pyopenssl renamed to python-pyopenssl diff --git a/pyopenssl/.footprint b/python-pyopenssl/.footprint similarity index 100% rename from pyopenssl/.footprint rename to python-pyopenssl/.footprint diff --git a/pyopenssl/.signature b/python-pyopenssl/.signature similarity index 56% rename from pyopenssl/.signature rename to python-pyopenssl/.signature index ca595c62..5ed3030b 100644 --- a/pyopenssl/.signature +++ b/python-pyopenssl/.signature @@ -1,5 +1,5 @@ untrusted comment: verify with /etc/ports/contrib.pub -RWSagIOpLGJF30bzrPMEul5WDd1NbmTx/1NKXJfOApCG06VOBVnahGTQdBMYjb42x4r8FzdfWvHYwhVU417zYkwFc11JdituYww= -SHA256 (Pkgfile) = ced8e6a82d15861f00e944cfb064ced70c0afa23fc4cefa6c66a98d5a00e2f1e +RWSagIOpLGJF3wquO4T16LgdyU5FR756zAnfZOtlt7BbWaBbeHzXZf0M8dNNfw05ztL37u/wNOmjQUdojznYwjREzmyybOSbdA4= +SHA256 (Pkgfile) = de5c7533946a6e48236ed908cb0aadad06eee29b97a856192f732227139c04b9 SHA256 (.footprint) = f190c4f77466feb3e7b4e0e21654bf8884530091098012b05913443036f7d479 SHA256 (pyOpenSSL-17.3.0.tar.gz) = 29630b9064a82e04d8242ea01d7c93d70ec320f5e3ed48e95fcabc6b1d0f6c76 diff --git a/pyopenssl/Pkgfile b/python-pyopenssl/Pkgfile similarity index 95% rename from pyopenssl/Pkgfile rename to python-pyopenssl/Pkgfile index 79f61f33..8d192e98 100644 --- a/pyopenssl/Pkgfile +++ b/python-pyopenssl/Pkgfile @@ -3,7 +3,7 @@ # Maintainer: Danny Rawlins, crux at romster dot me # Depends on: python-cryptography -name=pyopenssl +name=python-pyopenssl version=17.3.0 release=1 source=(https://pypi.io/packages/source/p/pyOpenSSL/pyOpenSSL-$version.tar.gz)

1 0

libcurl.so.4 problem
by Giorgio Cittadini 08 Nov '18

08 Nov '18

Hi All, while updating I'm blocked in one of my computers not being able to update clang, llvm, and perhaps other packages. This is what I get; cmake: error while loading shared libraries: /usr/lib/libcurl.so.4: file too short. Googling I found many suggestions, but no one worked for me. This is my locate libcurl.so.4 output: /usr/lib/libcurl.so.4 /usr/lib/libcurl.so.4.5.0 /usr/lib/libreoffice/program/libcurl.so.4. I changed the localedef from localedef -i it_IT -f UTF-8 it_IT.UTF-8 to: localedef -i it_IT -f ISO-8859-1 it_IT and viceversa but nothing changes. I would be very obliged if someone of our experts would explain me what I should do. Thanks Giorgio Cittadini

2 1