- CRUX - lists.crux.nu

ports/opt (2.3): [notify] lighttpd: updated to 1.4.16
by crux＠crux.nu 06 Aug '07

06 Aug '07

commit 655d2f98dfb09e7d3327c7f1bbcf6868d75acfbc Author: Simone Rota <sip(a)crux.nu> Date: Mon Aug 6 13:14:34 2007 +0200 [notify] lighttpd: updated to 1.4.16 diff --git a/lighttpd/.md5sum b/lighttpd/.md5sum index b8d20f4..5514712 100644 --- a/lighttpd/.md5sum +++ b/lighttpd/.md5sum @@ -1,3 +1,3 @@ -d2ceaaf242b2b3593ff4d8222d543649 lighttpd-1.4.15.tar.gz +04988067026e93ccb46e19fa8c17ae97 lighttpd-1.4.16.tar.gz 0ca699210055a3e137ffefdcd5441c09 lighttpd.conf acf07b7bf297e76923511abff24859b9 lighttpd.rc diff --git a/lighttpd/Pkgfile b/lighttpd/Pkgfile index 70f748a..b554e9e 100644 --- a/lighttpd/Pkgfile +++ b/lighttpd/Pkgfile @@ -5,7 +5,7 @@ # Depends on: name=lighttpd -version=1.4.15 +version=1.4.16 release=1 source=(http://www.$name.net/download/$name-$version.tar.gz \ $name.conf \

1 0

imlib-conf is missing
by Jeremy Heiler 05 Aug '07

05 Aug '07

I'm new to Crux (and linux in general) but I've managed to get Crux installed and working. I'm currently updating my system and trying to get IceWM installed. The problem is when I "pkgmk -d" icewm (that I used httpup to get) it gives me the error: "configure: error: imlib-config can not be found" So I looked for imlib in ports and I found imlib2 and imlib2_loader and installed those. I tried to install IceWM again but the same error came up. I searched Google for "imlib-conf" but all I found was that the file should of been made when I installed imlib2? I'm sorta confused. - jer

2 1

vmware-player port
by Frank Hale 04 Aug '07

04 Aug '07

Anyone know if there is a port for vmware-player for Crux? I've searched but haven't found any. The vmware-workstation port should be close enough but I haven't tried hacking it to work with vmware-player. Just trying to guage if hacking is required or if the work has already been done.

1 0

Hopfully another installation method
by Per Jernström 03 Aug '07

03 Aug '07

I think it would be nice if the boot-cd also came with sshd. I don't mean as a precompiled package, but bundeled. A while back I installed crux on a machine 200 km from home and the customer that ordered it had just basic knowledge about computers and non about linux. So I told him to download, burn and boot Knoppix and with a couple simple commands start sshd. Then I took over the installationprocess and donwloaded, installed crux. But it would have been nice (and simpler for me ;) )if he could have downloaded and booted crux-cd direct. Regards, Per

3 2

building binary packages?
by fikin 02 Aug '07

02 Aug '07

this might be obvious question but i'd appreciate some help. what is the way to build a tar.gz with the binaries out of a some port? fikin

3 2

xorg-libx11 and gimp
by Hitoshi Satow 01 Aug '07

01 Aug '07

I'm having an issue with gimp where it crashes when I use the pencil. I found documentation of the problem in a freeBSD forum saying it was an issue with xorg-libx11. They provided a patch. The easiest thing for me was to roll back to the previous version and it seems to be working now. -Hitoshi _________________________________________________________________ http://liveearth.msn.com

2 1

Yet another install method
by Bernd Eggink 01 Aug '07

01 Aug '07

I just installed Crux 2.3 on an old IBM Thinkpad X24, where neither the normal installation method nor the NFS method proposed by Jürgen Daubert worked. The peculiar situation is that this notebook has an external USB cdrom drive, which the Crux installation system can't handle, and no floppy drive to boot from. This is the solution I found. Maybe it can be of use to others, too. 1. Boot the system from a live Linux CD-ROM with good hardware detection, like Knoppix. 2. Create a partition on the hard disk big enough to hold the contents of the Crux CD-ROM. 3. Make a file system in this partition. 4. Copy the contents of the Crux CD-ROM to the file system's root. Provided that your network is working, transfer it using scp or NFS from another system, or use a USB stick. 5. Shut down the system and boot again, now from the Crux CD-ROM. At the boot prompt, say "CRUX root=/dev/hdaX", where hdaX is the partition you created. The rest is the same as with a normal install. As soon as the system is running, the additional partition can be deleted, re-used as a swap partition or whatever. Regards, Bernd -- Bernd Eggink monoped(a)sudrala.de http://autojar.sourceforge.de http://jboom.sourceforge.de

1 0

ports/opt (2.3): [notify] tcpdump: update to 3.9.7
by crux＠crux.nu 26 Jul '07

26 Jul '07

commit 1c01b1da7757ac80e076888513c1eabc28a14062 Author: Juergen Daubert <jue(a)jue.li> Date: Thu Jul 26 15:06:47 2007 +0200 [notify] tcpdump: update to 3.9.7 See http://securitytracker.com/alerts/2007/Jul/1018434.html diff --git a/tcpdump/.md5sum b/tcpdump/.md5sum index 34b6ec1..0b3d0b0 100644 --- a/tcpdump/.md5sum +++ b/tcpdump/.md5sum @@ -1 +1 @@ -2135e7b1f09af0eaf66d2af822bed44a tcpdump-3.9.5.tar.gz +2aacf4dc9a3bc500a8b4f3887a32cdd5 tcpdump-3.9.7.tar.gz diff --git a/tcpdump/Pkgfile b/tcpdump/Pkgfile index 12b1d4a..37e9280 100644 --- a/tcpdump/Pkgfile +++ b/tcpdump/Pkgfile @@ -4,7 +4,7 @@ # Depends on: libpcap, openssl name=tcpdump -version=3.9.5 +version=3.9.7 release=1 source=(http://www.tcpdump.org/release/$name-$version.tar.gz)

1 0

rpc.nfsd refuses to start
by Helge Fredriksen 23 Jul '07

23 Jul '07

Hello, I want to export a directory on my crux v2.6.15.6 box, but the nfsd seem to not start. I'm using the /etc/rc.d/nfsserver start command. After issuing, I get this running rpcinfo -p # rpcinfo -p program vers proto port 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 100005 1 udp 912 mountd 100005 1 tcp 915 mountd 100005 2 udp 912 mountd 100005 2 tcp 915 mountd 100005 3 udp 912 mountd 100005 3 tcp 915 mountd # I'm getting this in /var/log/messages: Jul 26 18:21:02 crux nfsd[11782]: nfssvc: Function not implemented Regards, Helge Fredriksen

3 3

For Tilman: xorg-server bug
by Tom Rindborg 20 Jul '07

20 Jul '07

Sorry to spam the list, but I got a bounce when trying to reach Tilman directly, hope this goes better. OTOH this info might be interesting if others are bitten by the same bug as me. Forwarded message follows: Hi Tilman, I recently upgraded xorg-server to 1.3.0.0, and since I am using the glint driver I was hit by the following bug: https://bugs.freedesktop.org/show_bug.cgi?id=10906 The driver (and of course xorg-server) crashed and locked up the display hardware. I have compiled xorg-server with the proposed patch, and that solved my problem. I do not know if more drivers are affected, but maybe it is a good idea to update xorg-server anyway? -- Hälsningar/Best regards, Tom ________________________________________________________________________ Tom Rindborg Phone: +46-8-599 984 40 Stockholm, Sweden MailTo:Tom.Rindborg@fatburen.org "If you have to hate, hate gently."

1 0