May 2007 - CRUX - lists.crux.nu

Re: where CRUX keeps ALSA configurations
by arnuld 07 May '07

07 May '07

> On 5/7/07, Anton Vorontsov <cbou(a)mail.ru> wrote: > So, you're using *exactly* same kernel source in gentoo and crux, and > in gentoo it works, and in crux it does not? not sure becaus eGentoo folks use "-r" at the end of kernel version. i used 3-4 different kernels in Gentoo and all those went fine. "2.6.19-r3", "2.6.19-r5", "2.6.19-r7", and for Gentoo AMD64 i used "2.6.19-r3 and r7". presently, i used Gentoo AMD64 2.6.20-r7 and CRUX has 2.6.20.3. > Just a wild guess.. Do you have CONFIG_CC_OPTIMIZE_FOR_SIZE=y line in > kernel's .config file? If so, try turning it off, recompile, and test. it is *always* turned off. i never optimize my kernel for size. > I've seen some alsa bugs when -Os (optimize for size) used with gcc-4. > Not via chips related, though... as i said i do NOT optimize. BTW, i do use "-02" when compiling "alsa-utils, and alsa-oss" on Gentoo and never had any trouble i don't understand the reason because CRUX 2.2 work flawlessly. -- http://arnuld.blogspot.com/

1 0

modprobe.conf
by Nicholas Lenz 07 May '07

07 May '07

After building alsa-utils and alsa-driver, I ran alsaconf to configure my sound card and the information was stored in /etc/modprobe.conf: # # /etc/modprobe.conf: modprobe(8) configuration # # --- BEGIN: Generated by ALSACONF, do not edit. --- # --- ALSACONF version 1.0.14rc2 --- alias snd-card-0 snd-via82xx alias sound-slot-0 snd-via82xx # --- END: Generated by ALSACONF, do not edit. --- lsmod shows: Module Size Used by ac97_bus 2048 0 snd_page_alloc 7816 0 via_rhine 19208 0 I am assuming that the information in modprobe.conf is not loaded during startup. Please tell me how to load this file during startup. I've tried "modprobe -C /etc/modprobe.conf" but that doesn't seem to do anything.

3 3

where CRUX keeps ALSA configurations
by arnuld 07 May '07

07 May '07

i am trying to enable ALSA . i have built ALSA support and my sound-card module into the kernel. now as advised by these 2 pages: http://gentoo-wiki.com/HOWTO_ALSA_sound_mixer_aka_dmix http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=VIA&card=… i see that i need to put my configurations (like alias snd-card-0) in a file. now i don't see any "/etc/conf.modules" or "/etc/modules.conf" as advised by ALSA-Project", nor i see any "/etc/modules.d/alsa" file. where does CRUX keeps ALSA configurations ? -- http://arnuld.blogspot.com/

3 11

sshd not working
by Thierry Nuttens 05 May '07

05 May '07

Hello everybody I just install crux 2.3. Unfortunatly ssh is not working if I do ssh -vvv root@hostname I get OpenSSH_4.3p2, OpenSSL 0.9.8b 04 May 2006 debug1: Reading configuration data /etc/ssh/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to inspiron1 [192.168.254.6] port 22. debug1: Connection established. debug1: identity file /home/thierry/.ssh/identity type -1 debug1: identity file /home/thierry/.ssh/id_rsa type -1 debug1: identity file /home/thierry/.ssh/id_dsa type -1 ssh_exchange_identification: Connection closed by remote host ... even after copied /etc/ssh/sshd_config from another working ssh server. Any idea Tanks a lot Thierry

2 1

Re: Running script before modules load
by Matthias Pfeifer 04 May '07

04 May '07

2007/5/4, Chris Pemberton <cjpembo(a)gmail.com>: > On 5/4/07, Matthias Pfeifer <pfemat(a)web.de> wrote: > > Hello, > > > > 2007/5/4, Chris Pemberton <cjpembo(a)gmail.com>: > > > > > > Where is the correct place to put commands that need to run prior to > > > the kernel autoloading modules? > > > > Why don't you do it with modprobe and /etc/modprobe.conf? > > A line like > > > > install mmc_core setpci -s 03:06.1 4c=0x22 && modprobe --ignore-install mmc_core > > > > might be it already, or am i in the wrong movie? > > > > matthias > > > > The setpci command is not a modules option for the mmc_core or sdhci > modules. It is a command I need to "fix a quirk" so that the mmc_core > and sdhci modules can load properly. I put the setpci command in > rc.local, but it made my usb keyboard fail... > The line I sent was supposed to do just that (well - up to the "keyboard fails" part). See "man modprobe.conf".

1 0

Running script before modules load
by Chris Pemberton 04 May '07

04 May '07

Hello, I need to run the following: setpci -s 03:06.1 4c=0x22 before the kernel auto-loads the mmc_core and sdhci modules. I placed the setpci command in rc.local and it didn't work (modules loaded, but SD reader didn't work). I have module autoloading enabled in the kernel. If I manually do: rmmod sdhci rmmod mmc_core setpci -s 03:06.1 4c=0x22 modprobe mmc_core modprobe sdhci the card reader works. This is to get a SD card reader working on a laptop. Where is the correct place to put commands that need to run prior to the kernel autoloading modules? Chris

1 0

ports/opt (2.3): [notify] mod_php: update to 5.5.2
by crux＠crux.nu 04 May '07

04 May '07

commit cc24c059e63fb24278c81bd2f929a426c0e0756d Author: Juergen Daubert <jue(a)jue.li> Date: Fri May 4 08:27:19 2007 +0200 [notify] mod_php: update to 5.5.2 security fixes, see http://www.php.net/releases/5_2_2.php diff --git a/mod_php/.md5sum b/mod_php/.md5sum index e2a52ff..0580e37 100644 --- a/mod_php/.md5sum +++ b/mod_php/.md5sum @@ -1 +1 @@ -261218e3569a777dbd87c16a15f05c8d php-5.2.1.tar.bz2 +d084337867d70b50a10322577be0e44e php-5.2.2.tar.bz2 diff --git a/mod_php/Pkgfile b/mod_php/Pkgfile index ccc6f1c..25a41a0 100644 --- a/mod_php/Pkgfile +++ b/mod_php/Pkgfile @@ -5,7 +5,7 @@ # Group: apache name=mod_php -version=5.2.1 +version=5.2.2 release=1 source=(http://www.php.net/distributions/php-$version.tar.bz2)

1 0

nvidia: missing glx link
by Hannes Mayer 03 May '07

03 May '07

Hi, I think at the nvidia port in opt, there is a missing sym link. Without this link, the driver work but without glx. Xlib: extension "GLX" missing on display ":0.0".... This two lines at the End of the Pkgfile fix this Problem ln -sf $PKG/usr/lib/xorg/modules/extensions/libglx.so.$version \ $PKG/usr/lib/xorg/modules/extensions/libglx.so regards Hannes

2 1

ports/core (2.3): [notify] vim: update to patchlevel 239
by crux＠crux.nu 03 May '07

03 May '07

commit 639c4ef1e0ac837b320e0e8356db73f6ad7ed8c9 Author: Juergen Daubert <jue(a)jue.li> Date: Wed May 2 19:34:05 2007 +0200 [notify] vim: update to patchlevel 239 Patches 234 and 235 are security related, see http://www.securityfocus.com/bid/23725 diff --git a/vim/.md5sum b/vim/.md5sum index 62b30ff..60344ad 100644 --- a/vim/.md5sum +++ b/vim/.md5sum @@ -1,3 +1,4 @@ e4d2d7df9dc3d0251b7d06683bc09cdf vim-7.0.001-109.tar.gz fbf8615ae070fe3b9088e0fbd84ebddb vim-7.0.110-224.tar.gz +b1eaff9822b31568270d157742b1f7b7 vim-7.0.225-239.tar.gz 4ca69757678272f718b1041c810d82d8 vim-7.0.tar.bz2 diff --git a/vim/Pkgfile b/vim/Pkgfile index 542294f..f36e8fb 100644 --- a/vim/Pkgfile +++ b/vim/Pkgfile @@ -6,15 +6,16 @@ name=vim version=7.0 -release=7 +release=8 source=(ftp://ftp.vim.org/pub/vim/unix/vim-$version.tar.bz2 \ http://jue.li/crux/files/$name-7.0.001-109.tar.gz \ - http://jue.li/crux/files/$name-7.0.110-224.tar.gz) + http://jue.li/crux/files/$name-7.0.110-224.tar.gz \ + http://jue.li/crux/files/$name-7.0.225-239.tar.gz) build () { cd $name${version/\./} - for p in $SRC/$name-7.0.{001-109,110-224}/*; do + for p in $SRC/$name-7.0.{001-109,110-224,225-239}/*; do patch -p0 -i $p done

5 4

Re: ALSA bug ?
by arnuld 01 May '07

01 May '07

> On 4/30/07, Hannes Mayer <kontakt(a)ecarux.de> wrote: > Am Montag, 30. April 2007 15:14:04 schrieben Sie: > > > On 4/30e07, Hannes Mayer <kontakt(a)ecarux.de> wrote: > > > Hi arnuld, > > > do you have a valid .asoundrc file? > > > > NO. i only have "asound.state" and as i said NO "/etc/rc.d/alsa" file > > unlike i have for cups and xdm. > > > > > Example: > > > pcm.via82xx { > > > type hw > > > card 0 > > > } > > > > > > ctl.via82xx { > > > type hw > > > card 0 > > > } > > > > i have created this file in my home directory and i am in the "audio" > > user group. i have created the same file for "root" but same problem > > > > :-( no change inproblem. BTW, i forgot to mention and noticed 3 > > > > things when i run "ogg123" or mpg321 (if that matters) and they happen > > with/without ".asoundrc": > > > Maybe you need some different Settings. > Did you read this page? : > http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=VIA&card=… > SORRY Hannes, this too does not work :-(, same problem -- http://arnuld.blogspot.com/

1 1