- CRUX - lists.crux.nu

CRUX for all platforms.
by Clemens Koller 31 May '07

31 May '07

Hi, There! I think it's a bit misleading what the Introduction section of http://crux.nu/ says: Introduction ------------ CRUX is a lightweight, i686-optimized Linux distribution targeted at experienced Linux users. ^^^^^^^^^^^^^^ Can we also at least mention that there are ports of CRUX for PowerPC, OpenBSD and ARM? It's also possible to optimize it for i586 or an Athlon XP or whatever because the CRUX ports system / philosophy is just flexible enough to work on all platforms. I would at least mention CRUX for PowerPC and add a Link to http://cruxppc.sunsite.dk. Can somebody please update the page? Thank you, -- Clemens Koller __________________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Straße 45/1 Linhof Werksgelände D-81379 München Tel.089-741518-50 Fax 089-741518-19 http://www.anagramm-technology.com

8 11

[Fwd: Re: [arch] [Fwd: [perl #40633] Perl 5.8.8 fails to compile with gcc 4.2]]
by RedShift 30 May '07

30 May '07

-------- Original Message -------- Subject: Re: [arch] [Fwd: [perl #40633] Perl 5.8.8 fails to compile with gcc 4.2] Date: Mon, 28 May 2007 14:02:31 -0700 From: Charles Mauch <cmauch.lists(a)gmail.com> Reply-To: General Discusson about Arch Linux <arch(a)archlinux.org> To: arch(a)archlinux.org References: <465AD809.5020508(a)pandora.be> Greetings from Tacoma, WA, USA, Earth, Sol, Milky Way, Verse, RedShift! On Monday, May 28, in the 2007th year of our Lord, you wrote: > Just FYI: > > Perl 5.8.8 fails to compile with gcc 4.2 -- apparently the dependency > generator output is misinterpreted. > > The configure script runs ok, but running make results in > > make: *** No rule to make target `<command-line>', needed by > `miniperlmain.o'. Stop. > > details: > http://www.nntp.perl.org/group/perl.perl5.porters/2006/10/msg117723.html > > The latest devel perl-5.9.4 seems to compile fine. > > Best greets, I have a patch that fixes this... --- perl-5.8.x/makedepend.SH 2006-06-13 15:31:22.000000000 -0400 +++ perl-5.8.x-andy/makedepend.SH 2006-07-25 14:45:11.000000000 -0400 @@ -167,6 +167,7 @@ -e '/^#.*<builtin>/d' \ -e '/^#.*<built-in>/d' \ -e '/^#.*<command line>/d' \ + -e '/^#.*<command-line>/d' \ -e '/^#.*"-"/d' \ -e '/: file path prefix .* never used$/d' \ -e 's#\.[0-9][0-9]*\.c#'"$file.c#" \ I've been doing a lot of playing with perl lately, and this cropped up. However, I think gcc 4.2 is only in testing at the moment, so it shouldn't be an issue for most people.

2 1

05.30.2007: server maintenance
by Simone Rota 30 May '07

30 May '07

Hi, Tonight 05.30.2007 from 20:00 CEST a mainteance procedure is planned for the crux.nu server. All public services (website, mailing lists, source repositories, etc.) will be unavailable. We apologise for any inconvenience caused, we will do our best to minimize the downtime. Regards, Simone -- Simone Rota Bergamo, Italy - http://www.varlock.com

2 1

[Fwd: Re: Fwd: pkgutils fails to build]
by Lucas Hazel 29 May '07

29 May '07

Apologies to Johannes, whom I sent this to rather than the ML.

1 0

Fwd: pkgutils fails to build
by Diederick de Vries 28 May '07

28 May '07

Hi, Pkgutils 5.30.0 fails to build on my machine. I seem to be missing some files. Can someone tell me if they should be part of the pkgutils package or that something else should provide them? And in the latter case, what package is responsible for them? I have a fresh Crux 2.3 install so I can't believe it's broken already. Thanks, Diederick. Here's the output: =======> Building '/usr/ports/core/pkgutils/pkgutils#5.30.0-1.pkg.tar.gz'. tar -C /usr/ports/core/pkgutils/work/src --use-compress-program=gzip -xf /usr/ports/core/pkgutils/pkgutils-5.30.0.tar.gz + build + cd pkgutils-5.30.0 + make DESTDIR=/usr/ports/core/pkgutils/work/pkg install g++ -O2 -march=i686 -pipe -DNDEBUG -O2 -Wall -pedantic -D_GNU_SOURCE -DVERSION=\"5.30.0\" -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -MM main.cc pkgutil.cc pkgadd.cc pkgrm.cc pkginfo.cc > .depend g++ -O2 -march=i686 -pipe -DNDEBUG -O2 -Wall -pedantic -D_GNU_SOURCE -DVERSION=\"5.30.0\" -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -c -o main.o main.cc g++ -O2 -march=i686 -pipe -DNDEBUG -O2 -Wall -pedantic -D_GNU_SOURCE -DVERSION=\"5.30.0\" -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -c -o pkgutil.o pkgutil.cc pkgutil.cc:43:21: error: archive.h: No such file or directory pkgutil.cc:44:27: error: archive_entry.h: No such file or directory pkgutil.cc: In member function 'std::pair<std::basic_string<char, std::char_traits<char>, std::allocator<char> >, pkgutil::pkginfo_t> pkgutil::pkg_open(const std::string&) const': pkgutil.cc:349: error: 'archive_read_new' was not declared in this scope pkgutil.cc:350: error: 'archive_read_support_compression_all' was not declared in this scope pkgutil.cc:350: error: 'archive_read_support_format_all' was not declared in this scope pkgutil.cc:354: error: 'ARCHIVE_DEFAULT_BYTES_PER_BLOCK' was not declared in this scope pkgutil.cc:354: error: 'archive_read_open_filename' was not declared in this scope pkgutil.cc:354: error: 'ARCHIVE_OK' was not declared in this scope pkgutil.cc:355: error: 'archive_errno' was not declared in this scope pkgutil.cc:357: error: 'archive_read_next_header' was not declared in this scope pkgutil.cc:358: error: 'ARCHIVE_OK' was not declared in this scope pkgutil.cc:361: error: 'archive_entry_pathname' was not declared in this scope pkgutil.cc:363: error: 'archive_entry_mode' was not declared in this scope pkgutil.cc:366: error: 'archive_read_data_skip' was not declared in this scope pkgutil.cc:367: error: 'archive_errno' was not declared in this scope pkgutil.cc:371: error: 'archive_errno' was not declared in this scope pkgutil.cc:377: error: 'archive_read_finish' was not declared in this scope pkgutil.cc: In member function 'void pkgutil::pkg_install(const std::string&, const std::set<std::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::less<std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::allocator<std::basic_string<char, std::char_traits<char>, std::allocator<char> > > >&, const std::set<std::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::less<std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::allocator<std::basic_string<char, std::char_traits<char>, std::allocator<char> > > >&) const': pkgutil.cc:388: error: 'archive_read_new' was not declared in this scope pkgutil.cc:389: error: 'archive_read_support_compression_all' was not declared in this scope pkgutil.cc:389: error: 'archive_read_support_format_all' was not declared in this scope pkgutil.cc:393: error: 'ARCHIVE_DEFAULT_BYTES_PER_BLOCK' was not declared in this scope pkgutil.cc:393: error: 'archive_read_open_filename' was not declared in this scope pkgutil.cc:393: error: 'ARCHIVE_OK' was not declared in this scope pkgutil.cc:394: error: 'archive_errno' was not declared in this scope pkgutil.cc:398: error: 'archive_read_next_header' was not declared in this scope pkgutil.cc:399: error: 'ARCHIVE_OK' was not declared in this scope pkgutil.cc:400: error: 'archive_entry_pathname' was not declared in this scope pkgutil.cc:411: error: 'archive_entry_mode' was not declared in this scope pkgutil.cc:414: error: 'archive_read_data_skip' was not declared in this scope pkgutil.cc:424: error: 'archive_entry_set_pathname' was not declared in this scope pkgutil.cc:427: error: 'ARCHIVE_EXTRACT_OWNER' was not declared in this scope pkgutil.cc:427: error: 'ARCHIVE_EXTRACT_PERM' was not declared in this scope pkgutil.cc:427: error: 'ARCHIVE_EXTRACT_UNLINK' was not declared in this scope pkgutil.cc:429: error: 'archive_read_extract' was not declared in this scope pkgutil.cc:432: error: 'archive_error_string' was not declared in this scope pkgutil.cc:440: error: 'archive_entry_mode' was not declared in this scope pkgutil.cc:459: error: 'archive_errno' was not declared in this scope pkgutil.cc:465: error: 'archive_read_finish' was not declared in this scope pkgutil.cc: In member function 'void pkgutil::pkg_footprint(std::string&) const': pkgutil.cc:503: error: 'archive_read_new' was not declared in this scope pkgutil.cc:504: error: 'archive_read_support_compression_all' was not declared in this scope pkgutil.cc:504: error: 'archive_read_support_format_all' was not declared in this scope pkgutil.cc:508: error: 'ARCHIVE_DEFAULT_BYTES_PER_BLOCK' was not declared in this scope pkgutil.cc:508: error: 'archive_read_open_filename' was not declared in this scope pkgutil.cc:508: error: 'ARCHIVE_OK' was not declared in this scope pkgutil.cc:509: error: 'archive_errno' was not declared in this scope pkgutil.cc:511: error: 'archive_read_next_header' was not declared in this scope pkgutil.cc:512: error: 'ARCHIVE_OK' was not declared in this scope pkgutil.cc:514: error: 'archive_entry_mode' was not declared in this scope pkgutil.cc:516: error: 'archive_entry_hardlink' was not declared in this scope pkgutil.cc:517: error: 'archive_entry_pathname' was not declared in this scope pkgutil.cc:522: error: 'archive_read_data_skip' was not declared in this scope pkgutil.cc:523: error: 'archive_errno' was not declared in this scope pkgutil.cc:526: error: 'archive_read_finish' was not declared in this scope pkgutil.cc:535: error: 'ARCHIVE_DEFAULT_BYTES_PER_BLOCK' was not declared in this scope pkgutil.cc:535: error: 'archive_read_open_filename' was not declared in this scope pkgutil.cc:535: error: 'ARCHIVE_OK' was not declared in this scope pkgutil.cc:536: error: 'archive_errno' was not declared in this scope pkgutil.cc:538: error: 'archive_read_next_header' was not declared in this scope pkgutil.cc:539: error: 'ARCHIVE_OK' was not declared in this scope pkgutil.cc:540: error: 'archive_entry_mode' was not declared in this scope pkgutil.cc:548: error: 'archive_entry_hardlink' was not declared in this scope pkgutil.cc:559: error: 'archive_entry_uid' was not declared in this scope pkgutil.cc:569: error: 'archive_entry_gid' was not declared in this scope pkgutil.cc:577: error: 'archive_entry_pathname' was not declared in this scope pkgutil.cc:582: error: 'archive_entry_symlink' was not declared in this scope pkgutil.cc:586: error: 'archive_entry_rdevmajor' was not declared in this scope pkgutil.cc:587: error: 'archive_entry_rdevminor' was not declared in this scope pkgutil.cc:590: error: 'archive_entry_size' was not declared in this scope pkgutil.cc:597: error: 'archive_read_data_skip' was not declared in this scope pkgutil.cc:598: error: 'archive_errno' was not declared in this scope pkgutil.cc:602: error: 'archive_errno' was not declared in this scope make: *** [pkgutil.o] Error 1 -- http://www.diederickdevries.net/

6 10

DMA for CD - Inspiron 9300
by Pawel Wielgus 28 May '07

28 May '07

Hi CRUXers, I have a problem with enabling DMA for CD in my Dell Inspiron 9300. >From hdparm /dev/hdc: /dev/hdc: HDIO_GET_MULTCOUNT failed: Invalid argument IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) HDIO_GETGEO failed: Invalid argument >From hdparm -d1 /dev/hdc: /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) Of course I tried to google it. Usually it's a problem of missing chipset driver in the kernel. In the relevant part of my 2.6.10 I have: Device Drivers ---> ATA/ATAPI/MFM/RLL support ---> <*> ATA/ATAPI/MFM/RLL support <*> Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy <*> Include IDE/ATA-2 DISK support <*> Include IDE/ATAPI CDROM support <*> generic/default IDE chipset support [*] PCI IDE chipset support [*] Sharing PCI IDE interrupts support [*] Generic PCI bus-master DMA support [*] Use PCI DMA by default when available <*> Intel PIIXn chipsets support So for me it looks good. The rest is off in that section. Any suggestion? Anyone was able to do it on that box ? Either I'm just missing sth, or it is too tricky for me :) Thanks, Pawel

5 10

[perl #40633] Perl 5.8.8 fails to compile with gcc 4.2
by Clemens Koller 27 May '07

27 May '07

Hello, again! Just FYI: Perl 5.8.8 fails to compile with gcc 4.2 -- apparently the dependency generator output is misinterpreted. The configure script runs ok, but running make results in make: *** No rule to make target `<command-line>', needed by `miniperlmain.o'. Stop. details: http://www.nntp.perl.org/group/perl.perl5.porters/2006/10/msg117723.html The latest devel perl-5.9.4 seems to compile fine. Best greets, -- Clemens Koller _______________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Str. 45/1 81379 Muenchen Germany http://www.anagramm-technology.com Phone: +49-89-741518-50 Fax: +49-89-741518-19

1 0

Re: libarchive-2.2.2 didn't build on powerpc/gcc-4.2.0, fix
by Clemens Koller 27 May '07

27 May '07

Hello, again! (Tim: please cc all!) libarchive-2.2.3 seems to be available. My patch is then obsoloete. Please update. Greets, Clemens Koller _______________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Str. 45/1 81379 Muenchen Germany http://www.anagramm-technology.com Phone: +49-89-741518-50 Fax: +49-89-741518-19 Tim Kientzle schrieb: > Clemens Koller wrote: >> >> libarchive-2.2.2 didn't build with gcc-4.2.0 on powerpc. >> >> Thanks to Tim Kientzle for the prompt bugfix! :-) >> >> Attached are the updated Pkgfiles plus a patch. >> Please test and update ports/core/libarchive. >> The latest pkgutils-5.30.0 now builds also fine on powerpc. :-) > > I've included this change in libarchive-2.2.3, > which is now available. > > Thanks for your help, > > Tim Kientzle >

1 0

ports/core (2.3): [notify] file: update to 4.21
by crux＠crux.nu 26 May '07

26 May '07

commit 3b04c9c0e57ed1f8d647dd5db519448e940caccb Author: Juergen Daubert <jue(a)jue.li> Date: Sat May 26 09:37:27 2007 +0200 [notify] file: update to 4.21 Security update, see http://lwn.net/Alerts/230955/ diff --git a/file/.md5sum b/file/.md5sum index 6e25834..21d3821 100644 --- a/file/.md5sum +++ b/file/.md5sum @@ -1 +1 @@ -402bdb26356791bd5d277099adacc006 file-4.20.tar.gz +9e3503116f4269a1be70220ee2234b0e file-4.21.tar.gz diff --git a/file/Pkgfile b/file/Pkgfile index c57b95e..4ec5724 100644 --- a/file/Pkgfile +++ b/file/Pkgfile @@ -5,7 +5,7 @@ # Depends on: zlib name=file -version=4.20 +version=4.21 release=1 source=(ftp://ftp.fu-berlin.de/unix/tools/file/$name-$version.tar.gz)

1 0

libarchive-2.2.2 didn't build on powerpc/gcc-4.2.0, fix
by Clemens Koller 24 May '07

24 May '07

Hi There! libarchive-2.2.2 didn't build with gcc-4.2.0 on powerpc. Thanks to Tim Kientzle for the prompt bugfix! :-) Attached are the updated Pkgfiles plus a patch. Please test and update ports/core/libarchive. The latest pkgutils-5.30.0 now builds also fine on powerpc. :-) Greets, -- Clemens Koller __________________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Straße 45/1 Linhof Werksgelände D-81379 München Tel.089-741518-50 Fax 089-741518-19 http://www.anagramm-technology.com # Description: Library to create and read several archive formats # URL: http://people.freebsd.org/~kientzle/libarchive/ # Maintainer: Tilman Sauerbeck, tilman at crux dot nu # Depends on: bzip2, zlib name=libarchive version=2.2.2 release=2 source=(http://people.freebsd.org/~kientzle/$name/src/$name-$version.tar.gz $name-$version-archive-entry-include.patch) build() { patch -p0 < $SRC/$name-$version-archive-entry-include.patch cd libarchive-$version ./configure --prefix=/usr --mandir=/usr/man make make DESTDIR=$PKG install rm -f $PKG/usr/bin/bsdtar rm -f $PKG/usr/man/man1/bsdtar.1 rmdir $PKG/usr/bin rmdir $PKG/usr/man/man1 } --- libarchive-2.2.2/libarchive/archive_entry.h~ 2007-05-04 17:21:51.000000000 +0200 +++ libarchive-2.2.2/libarchive/archive_entry.h 2007-05-24 18:18:12.000000000 +0200 @@ -28,6 +28,8 @@ #ifndef ARCHIVE_ENTRY_H_INCLUDED #define ARCHIVE_ENTRY_H_INCLUDED +#include <time.h> +#include <sys/types.h> #include <stddef.h> /* for wchar_t */ #include <unistd.h> 3a87ac7211b0ff953130b44e420d519f libarchive-2.2.2-archive-entry-include.patch 0162127d7e71a07eba39c9c3e906c78e libarchive-2.2.2.tar.gz drwxr-xr-x root/root usr/ drwxr-xr-x root/root usr/include/ -rw-r--r-- root/root usr/include/archive.h -rw-r--r-- root/root usr/include/archive_entry.h drwxr-xr-x root/root usr/lib/ -rw-r--r-- root/root usr/lib/libarchive.a -rwxr-xr-x root/root usr/lib/libarchive.la lrwxrwxrwx root/root usr/lib/libarchive.so -> libarchive.so.2.2.2 lrwxrwxrwx root/root usr/lib/libarchive.so.2 -> libarchive.so.2.2.2 -rwxr-xr-x root/root usr/lib/libarchive.so.2.2.2 drwxr-xr-x root/root usr/man/ drwxr-xr-x root/root usr/man/man3/ -rw-r--r-- root/root usr/man/man3/archive_entry.3.gz -rw-r--r-- root/root usr/man/man3/archive_read.3.gz -rw-r--r-- root/root usr/man/man3/archive_util.3.gz -rw-r--r-- root/root usr/man/man3/archive_write.3.gz -rw-r--r-- root/root usr/man/man3/archive_write_disk.3.gz -rw-r--r-- root/root usr/man/man3/libarchive.3.gz -rw-r--r-- root/root usr/man/man3/libarchive_internals.3.gz drwxr-xr-x root/root usr/man/man5/ -rw-r--r-- root/root usr/man/man5/libarchive-formats.5.gz -rw-r--r-- root/root usr/man/man5/tar.5.gz

1 0