October 2006 - CRUX - lists.crux.nu

Back to CRUX
by Anselm R. Garbe 05 Oct '06

05 Oct '06

Hi everybody, after some years of absence I'm back using CRUX. I got sick of all those pinko ponko distros which have one thing in common: bloat. Because of the fact that things didn't changed drastically, I ask, if there has been any development regarding to share packages? Another thing which I (still) dislike a little bit are the inconsistent naming conventions of the few utilities managing the ports and packages. There is ports, prt-* and pkg*. The naming convention of prt-* utilities seems to be grown evolutionary as counterpart to apt-* of debian? The pkg* naming convention seems to have its roots in slackware and *BSD? The ports utility seem to have its roots in CRUX itself... This is not a big deal, but I would pretty much like to rename those tools being consistent or to refactor them to some extend. I don't care how it is done, e.g. 1) pkg-{add,info,mk,rm}, prt-{get,cache}, ports -> prt-{list,update,diff} 2) prt{get,cache}, ports -> prt{list,update,diff} I'm not sure about splitting ports into pieces, but what I really dislike is typing prt-get on the one side and pkgmk on the other... I'd vote for prtget and prtcache at least ;) Last thing for this mail: Simone, did you continued the uCRUX development? I pretty much dislike GNU libc and would be glad to use uClibc or dietlibc at least for those parts of CRUX which compile fine with them... I tried to build a linux from scratch using a uclibc toolchain, and it got quite far (I even compile X11R7.1 with uClibc, some ioctl-related issues needed to be patched) - but I'm not sure it is a good idea to enforce everything to use a non-glibc environment, that's why I ask if some other would like to see such development that those tools which compile fine use a C library with at least clutter as possible. Regards, -- Anselm R. Garbe ><>< www.ebrag.de ><>< GPG key: 0D73F361

4 4

SATA drives not recognized
by Theo Kanter 04 Oct '06

04 Oct '06

Kernel 2.6.17.3 does not properly load the IDE disks that are attached to an onboard raid-controller Promise PDC200378 (aka Fastrak 378 or Fastrak S150 TX4) which resides on an MSI 865PE-NEO FISR2 motherboard as a "south bridge" for a maximum of two IDE disks and two SATA disks. I configured the BIOS for two IDE disks and RAID1, but the same thing happens when I configure this as SATA. These errors seen in the dmesg file as error messages (attached): ata1: SATA link down (SStatus 0) scsi0 : sata_nv ata2: SATA link down (SStatus 0) scsi1 : sata_nv The motherboard BIOS and Promise BIOS think everything is just fine. Perhaps I am lacking the correct drivers but the ones on http://www.promise.com/support/download/download2_eng.asp?productId=108&cat… aren't much help. There are also some old versions for redhat, suse, and mandrake, which aren't exactly what I need: http://www.promise.com/support/download/download2_eng.asp?productId=108&cat… http://www.promise.com/support/download/download2_eng.asp?productId=108&cat… So my questions are: a) is this a driver problem or did I miss something in .config (attached). b) if so, are there any other available drivers that can be used on Crux 2.2? c) if not, can I adapt the ones above? d) or else, should I go for some other piece of hardware (e.g. an ITE8212f)? Thanks in advance, --theo # # Automatically generated make config: don't edit # Linux kernel version: 2.6.17.13 # Wed Sep 13 20:54:09 2006 # CONFIG_X86_32=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_X86=y CONFIG_MMU=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_UID16=y CONFIG_VM86=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set # # Loadable module support # CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set # # Block layer # CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" # # Processor type and features # # CONFIG_SMP is not set CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set CONFIG_MPENTIUM4=y # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set CONFIG_X86_GENERIC=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y # CONFIG_HPET_TIMER is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_X86_UP_APIC is not set # CONFIG_X86_MCE is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set # CONFIG_MTRR is not set # CONFIG_EFI is not set # CONFIG_REGPARM is not set CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x100000 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management options (ACPI, APM) # CONFIG_PM=y CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # CONFIG_SOFTWARE_SUSPEND is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y # CONFIG_ACPI_SLEEP is not set # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set # CONFIG_ACPI_BUTTON is not set # CONFIG_ACPI_VIDEO is not set # CONFIG_ACPI_HOTKEY is not set # CONFIG_ACPI_FAN is not set # CONFIG_ACPI_PROCESSOR is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_CONTAINER is not set # # APM (Advanced Power Management) BIOS Support # # CONFIG_APM is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCIEPORTBUS=y CONFIG_ISA_DMA_API=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Networking # CONFIG_NET=y # # Networking options # # CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # # DCCP Configuration (EXPERIMENTAL) # # CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # # TIPC Configuration (EXPERIMENTAL) # # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y CONFIG_IEEE80211_CRYPT_TKIP=y # CONFIG_IEEE80211_SOFTMAC is not set CONFIG_WIRELESS_EXT=y # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play support # # CONFIG_PNP is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set CONFIG_BLK_CPQ_DA=y CONFIG_BLK_CPQ_CISS_DA=y # CONFIG_CISS_SCSI_TAPE is not set CONFIG_BLK_DEV_DAC960=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_SX8=y # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_CMD640 is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y CONFIG_IDEDMA_ONLYDISK=y CONFIG_BLK_DEV_AEC62XX=y CONFIG_BLK_DEV_ALI15X3=y # CONFIG_WDC_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y CONFIG_BLK_DEV_ATIIXP=y CONFIG_BLK_DEV_CMD64X=y CONFIG_BLK_DEV_TRIFLEX=y CONFIG_BLK_DEV_CY82C693=y CONFIG_BLK_DEV_CS5520=y CONFIG_BLK_DEV_CS5530=y CONFIG_BLK_DEV_CS5535=y CONFIG_BLK_DEV_HPT34X=y # CONFIG_HPT34X_AUTODMA is not set CONFIG_BLK_DEV_HPT366=y CONFIG_BLK_DEV_SC1200=y CONFIG_BLK_DEV_PIIX=y CONFIG_BLK_DEV_IT821X=y # CONFIG_BLK_DEV_NS87415 is not set CONFIG_BLK_DEV_PDC202XX_OLD=y # CONFIG_PDC202XX_BURST is not set CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_BLK_DEV_SVWKS is not set CONFIG_BLK_DEV_SIIMAGE=y CONFIG_BLK_DEV_SIS5513=y CONFIG_BLK_DEV_SLC90E66=y CONFIG_BLK_DEV_TRM290=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_ARM is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # # CONFIG_ISCSI_TCP is not set CONFIG_BLK_DEV_3W_XXXX_RAID=y CONFIG_SCSI_3W_9XXX=y CONFIG_SCSI_7000FASST=y CONFIG_SCSI_ACARD=y CONFIG_SCSI_AHA152X=y CONFIG_SCSI_AHA1542=y CONFIG_SCSI_AACRAID=y CONFIG_SCSI_AIC7XXX=y CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC7XXX_OLD is not set CONFIG_SCSI_AIC79XX=y CONFIG_AIC79XX_CMDS_PER_DEVICE=32 CONFIG_AIC79XX_RESET_DELAY_MS=15000 # CONFIG_AIC79XX_ENABLE_RD_STRM is not set # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 CONFIG_AIC79XX_REG_PRETTY_PRINT=y CONFIG_SCSI_DPT_I2O=y # CONFIG_SCSI_ADVANSYS is not set CONFIG_SCSI_IN2000=y CONFIG_MEGARAID_NEWGEN=y # CONFIG_MEGARAID_MM is not set # CONFIG_MEGARAID_LEGACY is not set CONFIG_MEGARAID_SAS=y CONFIG_SCSI_SATA=y CONFIG_SCSI_SATA_AHCI=y CONFIG_SCSI_SATA_SVW=y CONFIG_SCSI_ATA_PIIX=y # CONFIG_SCSI_SATA_MV is not set CONFIG_SCSI_SATA_NV=y # CONFIG_SCSI_PDC_ADMA is not set CONFIG_SCSI_SATA_QSTOR=y CONFIG_SCSI_SATA_PROMISE=y CONFIG_SCSI_SATA_SX4=y CONFIG_SCSI_SATA_SIL=y CONFIG_SCSI_SATA_SIL24=y CONFIG_SCSI_SATA_SIS=y CONFIG_SCSI_SATA_ULI=y CONFIG_SCSI_SATA_VIA=y CONFIG_SCSI_SATA_VITESSE=y CONFIG_SCSI_SATA_INTEL_COMBINED=y CONFIG_SCSI_BUSLOGIC=y # CONFIG_SCSI_OMIT_FLASHPOINT is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set CONFIG_SCSI_GDTH=y # CONFIG_SCSI_GENERIC_NCR5380 is not set CONFIG_SCSI_GENERIC_NCR5380_MMIO=y CONFIG_SCSI_IPS=y CONFIG_SCSI_INITIO=y CONFIG_SCSI_INIA100=y # CONFIG_SCSI_NCR53C406A is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y CONFIG_SCSI_IPR=y # CONFIG_SCSI_IPR_TRACE is not set # CONFIG_SCSI_IPR_DUMP is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SYM53C416 is not set CONFIG_SCSI_DC395x=y CONFIG_SCSI_DC390T=y # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set CONFIG_SCSI_NSP32=y # CONFIG_SCSI_DEBUG is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=y CONFIG_MD_RAID5=y # CONFIG_MD_RAID5_RESHAPE is not set # CONFIG_MD_RAID6 is not set CONFIG_MD_MULTIPATH=y # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set # CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # CONFIG_IEEE1394=y # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set # CONFIG_IEEE1394_OUI_DB is not set # CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set # CONFIG_IEEE1394_EXPORT_FULL_API is not set # # Device Drivers # # # Texas Instruments PCILynx requires I2C # # CONFIG_IEEE1394_OHCI1394 is not set # # Protocol Drivers # # CONFIG_IEEE1394_SBP2 is not set # CONFIG_IEEE1394_ETH1394 is not set # CONFIG_IEEE1394_RAWIO is not set # # I2O device support # CONFIG_I2O=y CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y CONFIG_I2O_EXT_ADAPTEC=y CONFIG_I2O_CONFIG=y CONFIG_I2O_CONFIG_OLD_IOCTL=y CONFIG_I2O_BUS=y CONFIG_I2O_BLOCK=y CONFIG_I2O_SCSI=m CONFIG_I2O_PROC=y # # Network device support # CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # PHY device support # # CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y CONFIG_EL1=y CONFIG_EL2=y CONFIG_ELPLUS=y CONFIG_EL16=y CONFIG_EL3=y CONFIG_3C515=y CONFIG_VORTEX=y CONFIG_TYPHOON=y CONFIG_LANCE=y CONFIG_NET_VENDOR_SMC=y CONFIG_WD80x3=y CONFIG_ULTRA=y CONFIG_SMC9194=y CONFIG_NET_VENDOR_RACAL=y CONFIG_NI5010=y CONFIG_NI52=y CONFIG_NI65=y # # Tulip family network device support # CONFIG_NET_TULIP=y CONFIG_DE2104X=y CONFIG_TULIP=y # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set # CONFIG_TULIP_NAPI is not set CONFIG_DE4X5=y CONFIG_WINBOND_840=y CONFIG_DM9102=y # CONFIG_ULI526X is not set CONFIG_AT1700=y CONFIG_DEPCA=y CONFIG_HP100=y # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y CONFIG_AMD8111_ETH=y # CONFIG_AMD8111E_NAPI is not set CONFIG_ADAPTEC_STARFIRE=y # CONFIG_ADAPTEC_STARFIRE_NAPI is not set CONFIG_AC3200=y CONFIG_APRICOT=y CONFIG_B44=y CONFIG_FORCEDETH=y CONFIG_CS89x0=y CONFIG_DGRS=y CONFIG_EEPRO100=y CONFIG_E100=y CONFIG_FEALNX=y CONFIG_NATSEMI=y CONFIG_NE2K_PCI=y CONFIG_8139CP=y CONFIG_8139TOO=y # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set CONFIG_SIS900=y CONFIG_EPIC100=y CONFIG_SUNDANCE=y # CONFIG_SUNDANCE_MMIO is not set CONFIG_TLAN=y CONFIG_VIA_RHINE=y # CONFIG_VIA_RHINE_MMIO is not set # # Ethernet (1000 Mbit) # CONFIG_ACENIC=y # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=y CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set CONFIG_NS83820=y CONFIG_HAMACHI=y CONFIG_YELLOWFIN=y CONFIG_R8169=y # CONFIG_R8169_NAPI is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set CONFIG_SK98LIN=y CONFIG_VIA_VELOCITY=y CONFIG_TIGON3=y # CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set CONFIG_IXGB=y # CONFIG_IXGB_NAPI is not set CONFIG_S2IO=y # CONFIG_S2IO_NAPI is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y # CONFIG_NET_WIRELESS_RTNETLINK is not set # # Obsolete Wireless cards support (pre-802.11) # # CONFIG_STRIP is not set # CONFIG_ARLAN is not set # CONFIG_WAVELAN is not set # # Wireless 802.11b ISA/PCI cards support # CONFIG_IPW2100=y # CONFIG_IPW2100_MONITOR is not set # CONFIG_IPW2100_DEBUG is not set CONFIG_IPW2200=y # CONFIG_IPW2200_MONITOR is not set # CONFIG_IPW_QOS is not set # CONFIG_IPW2200_DEBUG is not set # CONFIG_AIRO is not set # CONFIG_HERMES is not set # CONFIG_ATMEL is not set # # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # CONFIG_PRISM54=y # CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set # # TPM devices # # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set # # I2C support # # CONFIG_I2C is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Hardware Monitoring support # # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set # # Misc devices # # CONFIG_IBM_ASM is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # CONFIG_USB_DABUSB is not set # # Graphics support # # CONFIG_FB is not set # CONFIG_VIDEO_SELECT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # CONFIG_SND=y # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # ISA devices # # CONFIG_SND_ADLIB is not set # CONFIG_SND_AD1848 is not set # CONFIG_SND_CMI8330 is not set # CONFIG_SND_CS4231 is not set # CONFIG_SND_CS4232 is not set # CONFIG_SND_CS4236 is not set # CONFIG_SND_ES1688 is not set # CONFIG_SND_ES18XX is not set # CONFIG_SND_GUSCLASSIC is not set # CONFIG_SND_GUSEXTREME is not set # CONFIG_SND_GUSMAX is not set # CONFIG_SND_OPL3SA2 is not set # CONFIG_SND_OPTI92X_AD1848 is not set # CONFIG_SND_OPTI92X_CS4231 is not set # CONFIG_SND_OPTI93X is not set # CONFIG_SND_MIRO is not set # CONFIG_SND_SB8 is not set # CONFIG_SND_SB16 is not set # CONFIG_SND_SBAWE is not set # CONFIG_SND_SGALAXY is not set # CONFIG_SND_SSCAPE is not set # CONFIG_SND_WAVEFRONT is not set # # PCI devices # # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # # USB devices # # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_MON is not set # # USB port drivers # # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # # USB DSL modem support # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # LED devices # # CONFIG_NEW_LEDS is not set # # LED drivers # # # LED Triggers # # # InfiniBand support # # CONFIG_INFINIBAND is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # CONFIG_EDAC is not set # # Real Time Clock # # CONFIG_RTC_CLASS is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=y # CONFIG_JFS_POSIX_ACL is not set # CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_FS_POSIX_ACL is not set CONFIG_XFS_FS=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=y # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set CONFIG_SMB_FS=y # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=y # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Instrumentation Support # # CONFIG_PROFILING is not set # CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set # CONFIG_UNWIND_INFO is not set CONFIG_EARLY_PRINTK=y CONFIG_STACK_BACKTRACE_COLS=2 CONFIG_DOUBLEFAULT=y # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_586 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_DEFLATE is not set CONFIG_CRYPTO_MICHAEL_MIC=y # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices # # CONFIG_CRYPTO_DEV_PADLOCK is not set # # Library routines # CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y CONFIG_KTIME_SCALAR=y MEM window: f3e00000-f7efffff PREFETCH window: e7c00000-f3bfffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered highmem bounce pool size: 64 pages NTFS driver 2.1.27 [Flags: R/W]. fuse init (API version 7.6) JFS: nTxBlock = 8060, nTxLock = 64486 SGI XFS with large block numbers, no debug enabled Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 2.6.10) Intel(R) PRO/1000 Network Driver - version 7.0.33-k2 Copyright (c) 1999-2005 Intel Corporation. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3 PCI: Setting latency timer of device 0000:02:01.0 to 64 e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0c:76:3c:b7:bb e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Intel(R) PRO/10GbE Network Driver - version 1.0.100-k2 Copyright (c) 1999-2005 Intel Corporation. dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15 FW Version=$Version$ pcnet32.c:v1.32 18.Mar.2006 tsbogend(a)alpha.franken.de e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ThunderLAN driver v1.15 TLAN: 0 devices installed, PCI: 0 EISA: 0 ns83820.c: National Semiconductor DP83820 10/100/1000 driver. cs89x0:cs89x0_probe(0x0) PP_addr at 300[a]: 0xffff eth1: incorrect signature at 300[c]: 0xffff!=0x630E PP_addr at 320[a]: 0xffff eth1: incorrect signature at 320[c]: 0xffff!=0x630E PP_addr at 340[a]: 0xffff eth1: incorrect signature at 340[c]: 0xffff!=0x630E PP_addr at 360[a]: 0xffff eth1: incorrect signature at 360[c]: 0xffff!=0x630E PP_addr at 200[a]: 0xffff eth1: incorrect signature at 200[c]: 0xffff!=0x630E PP_addr at 220[a]: 0xffff eth1: incorrect signature at 220[c]: 0xffff!=0x630E PP_addr at 240[a]: 0xffff eth1: incorrect signature at 240[c]: 0xffff!=0x630E PP_addr at 260[a]: 0xffff eth1: incorrect signature at 260[c]: 0xffff!=0x630E PP_addr at 280[a]: 0xffff eth1: incorrect signature at 280[c]: 0xffff!=0x630E PP_addr at 2a0[a]: 0xffff eth1: incorrect signature at 2a0[c]: 0xffff!=0x630E PP_addr at 2c0[a]: 0xffff eth1: incorrect signature at 2c0[c]: 0xffff!=0x630E PP_addr at 2e0[a]: 0xffff eth1: incorrect signature at 2e0[c]: 0xffff!=0x630E cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP Trying to free nonexistent resource <00000000-00000010> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54. depca: probe of depca.0 failed with error -16 ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 ipw2100: Copyright(c) 2003-2006 Intel Corporation ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.1.1 ipw2200: Copyright(c) 2003-2006 Intel Corporation Loaded prism54 driver, version 1.2 dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) winbond-840.c:v1.01-d (2.4 port) Nov-17-2001 Donald Becker <becker(a)scyld.com> http://www.scyld.com/network/drivers.html Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: ST3120026A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: LITE-ON LTR-16102B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hda3 hda4 hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... Adaptec aacraid driver (1.1-5[2409]-mh1) Failed initialization of WD-7000 SCSI card! megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006 GDT-HA: Storage RAID Controller Driver. Version: 3.04 GDT-HA: Found 0 PCI Storage RAID Controllers 3ware Storage Controller device driver for Linux v1.26.02.001. 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. nsp32: loading... ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006) libata version 1.20 loaded. sata_promise 0000:03:09.0: version 1.04 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:03:09.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 ata1: SATA max UDMA/133 cmd 0xF8802200 ctl 0xF8802238 bmdma 0x0 irq 11 ata2: SATA max UDMA/133 cmd 0xF8802280 ctl 0xF88022B8 bmdma 0x0 irq 11 ata1: SATA link down (SStatus 0) scsi2 : sata_promise ata2: SATA link down (SStatus 0) scsi3 : sata_promise ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 12 (level, low) -> IRQ 12 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 12, io mem 0xf7fffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000e000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000e400 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 3, io base 0x0000e800 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 10, io base 0x0000ec00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usb 3-1: new low speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice usbcore: registered new driver usb-storage USB Mass Storage support registered. input: USBPS2 as /class/input/input0 input: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.1-1 input: USBPS2 as /class/input/input1 input: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.1-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice I2O subsystem v1.325 i2o: max drivers = 8 i2o: Checking for PCI I2O controllers... ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:03:01.1[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 iop0: controller found (0000:03:01.1) iop0: PCI I2O controller at EC000000 size=67108864 iop0: Installed at IRQ 11 i2o: iop0: Activating I2O controller... i2o: iop0: This may take a few minutes if there are many devices iop0: HRT has 41 entries of 16 bytes each. Adapter A03ECF90: TID 0FFF:[]:PCI 0: Bus 3 Device 0 Function 1 Adapter A03ECF20: TID 0FFF:[]:PCI 0: Bus 3 Device 1 Function 1 Adapter A03ECEB0: TID 0FFF:[]:PCI 0: Bus 3 Device 2 Function 1 Adapter A03ECE40: TID 0FFF:[]:PCI 0: Bus 3 Device 2 Function 2 Adapter A03ECDD0: TID 0FFF:[]:PCI 0: Bus 3 Device 2 Function 4 Adapter A03ECD60: TID 0FFF:[]:PCI 0: Bus 3 Device 2 Function 8 Adapter A03ECCF0: TID 0FFF:[]:PCI 0: Bus 3 Device 3 Function 1 Adapter A03ECC80: TID 0FFF:[]:PCI 0: Bus 3 Device 4 Function 1 Adapter A03ECC10: TID 0FFF:[]:PCI 0: Bus 3 Device 4 Function 2 Adapter A03ECBA0: TID 0FFF:[]:PCI 0: Bus 3 Device 4 Function 8 Adapter A03ECB30: TID 0FFF:[]:PCI 0: Bus 3 Device 5 Function 1 Adapter A03ECAC0: TID 0FFF:[]:PCI 0: Bus 3 Device 6 Function 1 Adapter A03ECA50: TID 0FFF:[]:PCI 0: Bus 3 Device 7 Function 1 Adapter A03EC9E0: TID 0FFF:[]:PCI 0: Bus 3 Device 8 Function 1 Adapter A03EC970: TID 0FFF:[]:PCI 0: Bus 3 Device 9 Function 1 Adapter A03EC900: TID 0FFF:[]:PCI 0: Bus 3 Device 10 Function 1 Adapter A03EC890: TID 0FFF:[]:PCI 0: Bus 3 Device 11 Function 1 Adapter A03EC820: TID 0FFF:[]:PCI 0: Bus 3 Device 12 Function 1 Adapter A03EC7B0: TID 0FFF:[]:PCI 0: Bus 3 Device 13 Function 1 Adapter A03EC740: TID 0FFF:[]:PCI 0: Bus 3 Device 14 Function 1 Adapter A03EC6D0: TID 0FFF:[]:PCI 0: Bus 3 Device 15 Function 1 Adapter A03EC660: TID 0FFF:[]:PCI 0: Bus 3 Device 16 Function 1 Adapter A03EC5F0: TID 0FFF:[]:PCI 0: Bus 3 Device 17 Function 1 Adapter A03EC580: TID 0FFF:[]:PCI 0: Bus 3 Device 18 Function 1 Adapter A03EC510: TID 0FFF:[]:PCI 0: Bus 3 Device 19 Function 1 Adapter A03EC4A0: TID 0FFF:[]:PCI 0: Bus 3 Device 20 Function 1 Adapter A03EC430: TID 0FFF:[]:PCI 0: Bus 3 Device 21 Function 1 Adapter A03EC3C0: TID 0FFF:[]:PCI 0: Bus 3 Device 22 Function 1 Adapter A03EC350: TID 0FFF:[]:PCI 0: Bus 3 Device 23 Function 1 Adapter A03EC2E0: TID 0FFF:[]:PCI 0: Bus 3 Device 24 Function 1 Adapter A03EC270: TID 0FFF:[]:PCI 0: Bus 3 Device 25 Function 1 Adapter A03EC200: TID 0FFF:[]:PCI 0: Bus 3 Device 26 Function 1 Adapter A03EC190: TID 0FFF:[]:PCI 0: Bus 3 Device 27 Function 1 Adapter A03EC120: TID 0FFF:[]:PCI 0: Bus 3 Device 28 Function 1 Adapter A03EC0B0: TID 0FFF:[]:PCI 0: Bus 3 Device 29 Function 1 Adapter A03EC040: TID 0FFF:[]:PCI 0: Bus 3 Device 30 Function 1 Adapter A03EBFD0: TID 0FFF:[]:PCI 0: Bus 3 Device 31 Function 1 Adapter A03EBEB0: TID 0008:[PC]:PCI 1: Bus 4 Device 0 Function 1 Adapter A03EBE40: TID 0008:[PC]:PCI 1: Bus 4 Device 1 Function 1 Adapter A03EBDD0: TID 0008:[PC]:PCI 1: Bus 4 Device 2 Function 1 Adapter A03EBD60: TID 0FFF:[]:PCI 1: Bus 0 Device 65 Function 237 input: AT Translated Set 2 keyboard as /class/input/input2 i2o: iop0: Controller added I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 i2o/hda: i2o/hda1 block-osm: device added (TID: 00f): i2o/hda I2O ProcFS OSM v1.316 md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 3116.000 MB/sec raid5: using function: pIII_sse (3116.000 MB/sec) md: multipath personality registered for level -4 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC). ALSA device list: No soundcards found. TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno(a)linux.intel.com> ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'TKIP' Using IPI Shortcut mode md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ReiserFS: hda6: found reiserfs format "3.6" with standard journal ReiserFS: hda6: using ordered data mode ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda6: checking transaction log (hda6) ReiserFS: hda6: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 400k freed ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names ReiserFS: hda8: found reiserfs format "3.6" with standard journal ReiserFS: hda8: using ordered data mode ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda8: checking transaction log (hda8) ReiserFS: hda8: Using r5 hash to sort names ReiserFS: hda1: found reiserfs format "3.6" with standard journal ReiserFS: hda1: using ordered data mode ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda1: checking transaction log (hda1) ReiserFS: hda1: Using r5 hash to sort names ReiserFS: i2o/hda1: found reiserfs format "3.6" with standard journal ReiserFS: i2o/hda1: using ordered data mode ReiserFS: i2o/hda1: journal params: device i2o/hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: i2o/hda1: checking transaction log (i2o/hda1) ReiserFS: i2o/hda1: Using r5 hash to sort names Adding 2000052k swap on /dev/hda5. Priority:-1 extents:1 across:2000052k e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex

3 7

Update of X11 failed in Crux 2.2
by Theo Kanter 03 Oct '06

03 Oct '06

This happened on all of my machines running Crux 2.2. Probably because I configured them the same way. Consulted the FAQ, mailing list, and Google but no answers as to why update from 6.9.0-4 to 6.9.0-5 of X11 failed (see the end of the build as well as below): [stuff deleted] " make[5]: Leaving directory `/usr/ports/opt/x11/work/src/xc/fonts/bdf/cyrillic' make[4]: Leaving directory `/usr/ports/opt/x11/work/src/xc/fonts/bdf' making all in fonts/scaled... make[4]: Entering directory `/usr/ports/opt/x11/work/src/xc/fonts/scaled' making all in fonts/scaled/Type1... make[5]: Entering directory `/usr/ports/opt/x11/work/src/xc/fonts/scaled/Type1' rm -f fonts.scale LD_LIBRARY_PATH=../../../exports/lib XLOCALEDIR=../../../exports/lib/locale ../../../exports/bin/mkfontscale . rm -f fonts.dir LD_LIBRARY_PATH=../../../exports/lib XLOCALEDIR=../../../exports/lib/locale ../../../exports/bin/mkfontscale -b -s -l . /usr/bin/fc-cache . /usr/ports/opt/x11/work/src/xc/fonts/scaled/Type1: failed to write cache make[5]: *** [fonts.cache] Error 1 make[5]: Leaving directory `/usr/ports/opt/x11/work/src/xc/fonts/scaled/Type1' make[4]: *** [all] Error 2 make[4]: Leaving directory `/usr/ports/opt/x11/work/src/xc/fonts/scaled' make[3]: *** [all] Error 2 make[3]: Leaving directory `/usr/ports/opt/x11/work/src/xc/fonts' make[2]: *** [all] Error 2 make[2]: Leaving directory `/usr/ports/opt/x11/work/src/xc' make[1]: *** [World] Error 2 make[1]: Leaving directory `/usr/ports/opt/x11/work/src/xc' make: *** [World] Error 2 =======> ERROR: Building '/usr/ports/opt/x11/x11#6.9.0-5.pkg.tar.gz' failed. -- Packages where update failed x11 Press <ENTER> to continue .." Could someone please tell me what is going on here? Thanks --theo

3 4

RE: mailinglist vs web forum
by Tobias Richter 02 Oct '06

02 Oct '06

Hi guys, I'm quit new to the crux community but i really like it - it's one of the best distribution i used so far (the ports system is really great and crux linux is so kiss). But there are is one point where crux can not keep up with other distributions and that is the help for "crux newbies" (i don't meen linux newbies for this species maybe a other disti. is better...). There is quit a good documentation but the only way where a user can ask questitions are irc or the mailinglist. I like irc and mailinglists, but forums are quit normal for every distribution and they have disadvantage but they also advantages specialy for new users. And forums are mostly better adoptive then mailinglists - so nearly every distri. have a forum only crux linux have none. Hence i have simply put a forum under the domain crux-forum.com. please review and maybe someone can put a link at crux.nu to the forum ? I respect Johannes thoughts about a forum and we will follow them: 1. for this to work, motivated CRUX _users_ must take the responsibility to provide help/support there 2. the mailing list is authoritive and the place for "official" discussion. So the Subject of this Email isn't right it should be "official mailinglist and web forum" And I need help (mods etc.) - pleace email me if you want to help ! Please don't slap me - it is only a experiment. When nobody is interested in the forum i close it... Tell me your thoughts ! Best Regards, Tobias 'tri' Richter send me a mail: tri(a)imi.st visit me at: http://opt.imi.st

12 16

find dependency of ELF binary for library
by Itn 02 Oct '06

02 Oct '06

Hi CRUXers. I make bash script for finding ELF binary depending on specified library. and output the packages the files belongs to. It's useful to find influence of updating library. Its usage is: findelfdepend.sh [options] library_name [dirs] library_name is exactly one and must be set. not search recursive. output format is "package_name filename"(depends on pkginfo) Options are -h:help -l:search library described in /etc/ld.so.conf and /lib /usr/lib -b:search $PATH directories -v:verbose output to stderr It requires ldd(glibc),file command ,and some basic applications (bash,coreutils,sed and so on). In fact,this script is very slow and not smart,but simple. If there is the similar one,please take no notice;-)

1 0

errata?
by Joel Brooks 02 Oct '06

02 Oct '06

hey gang, how does one acquire a username/password for the Errat listd on the main http://www.crxu.nu/Main/Documentation page? Thanks! J

3 2

firefox for paranoid people
by Han Boetes 02 Oct '06

02 Oct '06

Hi, Since a recent article about possible zero-day exploits in firefox I started doing some proactive security, and I wrote down how I did it. Here it is: firefox for paranoid people. If firefox has a separate useraccount you can still browse the internet but if firefox gets hacked it won't affect the contents of your homedir, or rather the safety of your data. So how do you set that up: 1) Make a useraccount for firefox: $ sudo groupadd browser $ sudo useradd -m -s /usr/local/bin/firefox-rc -g browser firefox 2) Add a line like this line with visudo: han ALL=(ALL) NOPASSWD: /usr/bin/su - firefox 3) Copy your ~/.mozilla, your ~/.gtk* and ~/.font* ~/.Xdefaults to ~firefox $ sudo cp -R ~/.mozilla ~/.gtk* ~/.font* ~/.Xdefaults ~firefox 4) Create a tmpdir for firefox $ sudo install -d -m 700 ~firefox/.tmp 5) Set the right ownership for the firefox homedirectory. $ sudo chown -R firefox:browser ~firefox 6) Save this script as /usr/local/bin/firefox-wrapper #!/bin/sh PATH=$PATH:/usr/X11R6/bin FOXBIN=/usr/local/bin/firefox if ! pgrep -x $FOXBIN; then xhost +si:localuser:firefox sudo /usr/bin/su - $FOXBIN & fi 7) Save this script as /usr/local/bin/firefox-rc #!/bin/sh export DISPLAY=:0.0 LC_ALL=en_GB TMP=~/.tmp TMPDIR=~/.tmp xrdb -load ~/.Xdefaults /usr/local/bin/firefox 8) Give the scripts the right permissions. $ sudo chmod 755 /usr/local/bin/firefox-rc $ sudo chmod 755 /usr/local/bin/firefox-wrapper 9) Run the script. If things go wrong run it from an xterm to see what happens. $ firefox-wrapper The latest version of this document can be found over here: http://www.xs4all.nl/~hanb/documents/firefox_for_paranoid_people # Han -- http://www.xs4all.nl/~hanb/software/crux/

1 0

firefox for paranoid people
by Han Boetes 02 Oct '06

02 Oct '06

Hi, Since a recent article about possible zero-day exploits in firefox I started doing some proactive security, and I wrote down how I did it. Here it is: firefox for paranoid people. If firefox has a separate useraccount you can still browse the internet but if firefox gets hacked it won't affect the contents of your homedir, or rather the safety of your data. So how do you set that up: 1) Make a useraccount for firefox: $ sudo groupadd browser $ sudo useradd -m -s /usr/local/bin/firefox-rc -g browser firefox 2) Add a line like this line with visudo: han ALL=(ALL) NOPASSWD: /usr/bin/su - firefox 3) Copy your ~/.mozilla, your ~/.gtk* and ~/.font* ~/.Xdefaults to ~firefox $ sudo cp -R ~/.mozilla ~/.gtk* ~/.font* ~/.Xdefaults ~firefox 4) Create a tmpdir for firefox $ sudo install -d -m 700 ~firefox/.tmp 5) Set the right ownership for the firefox homedirectory. $ sudo chown -R firefox:browser ~firefox 6) Save this script as /usr/local/bin/firefox-wrapper #!/bin/sh PATH=$PATH:/usr/X11R6/bin FOXBIN=/usr/local/bin/firefox if ! pgrep -x $FOXBIN; then xhost +si:localuser:firefox sudo /usr/bin/su - $FOXBIN & fi 7) Save this script as /usr/local/bin/firefox-rc #!/bin/sh export DISPLAY=:0.0 LC_ALL=en_GB TMP=~/.tmp TMPDIR=~/.tmp xrdb -load ~/.Xdefaults /usr/local/bin/firefox 8) Give the scripts the right permissions. $ sudo chmod 755 /usr/local/bin/firefox-rc $ sudo chmod 755 /usr/local/bin/firefox-wrapper 9) Run the script. If things go wrong run it from an xterm to see what happens. $ firefox-wrapper The latest version of this document can be found over here: http://www.xs4all.nl/~hanb/documents/firefox_for_paranoid_people # Han

1 0

[security] crux-2.2/ports/opt/phpmyadmin/
by crux＠crux.nu 01 Oct '06

01 Oct '06

This is a notification of a security related commit in crux-2.2/ports/opt/phpmyadmin/: phpmyadmin: update to 2.9.0.1, http://www.phpmyadmin.net/home_page/security.php?issue=PMASA-2006-5 Commit information: Author: jue Date: 2006-10-01 17:31:48 +0200 (Sun, 01 Oct 2006) URL http://crux.nu/svnweb/CRUX/revision/?rev=1981

1 0

Some ports need addressing!
by Eric M. Fortner 01 Oct '06

01 Oct '06

Hello folks! I have some ports that all not working! J2re : will not ever download only gets partial then dies psmisc : keeps having a .md5sum mismatch firefox-flash-plugin : keeps having a .md5sum mismatch I donot mind trying to fix some of these issues, however, I am not familiar or do not know how to long or do what needs to be done. I can say for sure though, that this needs to be addressed because I depend on this OS for school and it is not convenient to have to try to keep working around issues of mismatched md5sums......Maybe you could ask if we can all take a package or two so we can keep it updated cleanly and on time. Best Regards; Eric M Fortner

10 19